PDA

View Full Version : Everyone else's Gallery


TommyDee
11-12-2017, 10:41 PM
2380

https://www.thingiverse.com/thing:2245289

- - - - - - - - - -

2381
https://www.thingiverse.com/thing:2561050

- - - - - - - - - -

2382
https://www.thingiverse.com/make:373135
bolsoncerrado
11-13-2017, 07:40 AM
Woah! Cube 3 at its best! :D
TommyDee
11-19-2017, 12:38 AM
2410
Crater Lake, OR
bolsoncerrado
11-19-2017, 12:54 AM
Is that your print TD?
70micron?
TommyDee
11-19-2017, 01:00 AM
200 microns. Rendered this from a "contour map" site. Z-exaggerated by 5X.
bolsoncerrado
11-19-2017, 09:38 PM
Awesome, so far their PLA outperforms most of competitors inside a Cube3....
TommyDee
05-03-2018, 08:08 PM
Try the 3D Solutech. They'll send you samples.
Behaves very much like 3DS filament. They are vibrant colors. And its cheap enough!

- - - - - - - - - -

2573

- - - - - - - - - -

2612

- - - - - - - - - -

2625

3D Solutech Silver ABS printed through Windooze 10 M$ 3D Builder.
TommyDee
05-29-2018, 08:34 PM
2665
bolsoncerrado
05-30-2018, 08:22 AM
Are you opening a dimensional portal soon? :D
TommyDee
11-07-2018, 03:46 AM
What do you mean soon?

Actually I am trying to see just how fast I can empty a full cartridge.
Making pretty good progress. Requires making some much heavier and larger parts that I am use to printing.
It is also testing the latest nozzle assembly that is technically fitting-less.
I am using the PC4-M6-through fittings that didn't require the groove for this test.
Rather than use the fittings to remove the tube, you just unscrew the printed "nut"

- - - - - - - - - -

2684
https://www.thingiverse.com/thing:2969354

- - - - - - - - - -

2744

3D Solutech Pure White
https://www.thingiverse.com/thing:1700492

- - - - - - - - - -

2807

https://www.thingiverse.com/thing:3045262

- - - - - - - - - -

Ever get hooked on a design and you just can't quit printing it?

2809

Mix of ABS and PLA prints.
This lot represents a lot of filament changes!

- - - - - - - - - -

2858

Still one of the best 3D printable statues.
This one using MakeShaper Natural ABS.
If you like printing figurines, I might suggest this color,
...or non-color in this case.

- - - - - - - - - -

I do like the 3D Systems Silver ABS from one of their printers...
And the bed wasn't heated!

2883

- - - - - - - - - -

3D Systems Brown ABS meets 70 microns and 400 grit, followed by a course polish.

2885

This takes on the look of a wood or stone ring with minimal effort.
bolsoncerrado
11-07-2018, 07:27 AM
Nice ring indeed! I had to look twice and believe that was ABS, wow
TommyDee
01-27-2019, 06:43 PM
3000