PDA

View Full Version : Missing the usb stick



emili
01-20-2018, 12:52 AM
Just received my printer without the usb stick . I bought a used printer that was returned to b&hphoto within a few days from purchase. i can see that it was used because the print bed has scratches, but the cartridges still show 99%. Can i just use any other USB or is there a part of the firmware on there?
For the CubeToolbox can i still do the hack without this usb and drop the file on another usb. I'm on a mac by the way?
🤷🏻

MegaloDon
01-20-2018, 03:38 AM
Can i just use any other USB or is there a part of the firmware on there?
For the CubeToolbox can i still do the hack without this usb and drop the file on another usb. I'm on a mac by the way?

You can use another USB stick as long as it is formatted FAT32.

As far as the Cube Toolbox, it only works in Windows. You will need to get the file already hacked.

- - - - - - - - - -

Here is the patched version >>> https://drive.google.com/open?id=1zWI4MM4P5f4P-rPfi6SEIvqmJDzy9WEU

emili
01-22-2018, 06:41 PM
Thanks for the info.
Just to confirm I formatted a usb stick and I should be able to just drop this file on the Cube3?

MegaloDon
01-22-2018, 11:08 PM
Thanks for the info.
Just to confirm I formatted a usb stick and I should be able to just drop this file on the Cube3?

As long as it is formatted FAT32, you just need to go to settings, firmware, and upgrade from USB.

emili
01-23-2018, 07:19 PM
It worked thanks!

MegaloDon
01-24-2018, 12:08 AM
No problem. That's what we're here for. :p