PDA

View Full Version : MatterControl for Rapide Lite 200



lawong
12-17-2014, 04:27 PM
Here's the configuration file that I made for MatterControl taking the settings that Ethan gave for Repeitier:

https://www.dropbox.com/s/jdwi85k144vypir/default_settings.ini?dl=0


MatterControl is a nice free open source app for both Windows and OSX.

http://www.mattercontrol.com/

The control is nice and clean and it seems to work well.


Let me know if you have comments or spotted any issues.

scottyblue77
01-13-2015, 09:38 AM
Hi,
i have an issue, after setting up all relevant setting, manual extraction works, but while printing there is no extraction.....

lawong
02-20-2015, 05:57 PM
sorry, couldn't understand the manual extraction part....

could you elaborate more?

Holgamods
02-20-2015, 06:54 PM
Once you tell it to print, you can only adjust the speed and extrusion multipliers in MatterControl