Everyone else's Gallery

Attachment 2380

https://www.thingiverse.com/thing:2245289

- - - - - - - - - -

Attachment 2381
https://www.thingiverse.com/thing:2561050

- - - - - - - - - -

Attachment 2382
https://www.thingiverse.com/make:373135

Woah! Cube 3 at its best! :D

Attachment 2410
Crater Lake, OR

Is that your print TD?
70micron?

200 microns. Rendered this from a "contour map" site. Z-exaggerated by 5X.

Awesome, so far their PLA outperforms most of competitors inside a Cube3....

Try the 3D Solutech. They'll send you samples.
Behaves very much like 3DS filament. They are vibrant colors. And its cheap enough!

- - - - - - - - - -

Attachment 2573

- - - - - - - - - -

Attachment 2612

- - - - - - - - - -

Attachment 2625

3D Solutech Silver ABS printed through Windooze 10 M$ 3D Builder.

Attachment 2665

Are you opening a dimensional portal soon? :D

What do you mean soon?

Actually I am trying to see just how fast I can empty a full cartridge.
Making pretty good progress. Requires making some much heavier and larger parts that I am use to printing.
It is also testing the latest nozzle assembly that is technically fitting-less.
I am using the PC4-M6-through fittings that didn't require the groove for this test.
Rather than use the fittings to remove the tube, you just unscrew the printed "nut"

- - - - - - - - - -

Attachment 2684
https://www.thingiverse.com/thing:2969354

- - - - - - - - - -

Attachment 2744

3D Solutech Pure White
https://www.thingiverse.com/thing:1700492

- - - - - - - - - -

Attachment 2807

https://www.thingiverse.com/thing:3045262

- - - - - - - - - -

Ever get hooked on a design and you just can't quit printing it?

Attachment 2809

Mix of ABS and PLA prints.
This lot represents a lot of filament changes!

- - - - - - - - - -

Attachment 2858

Still one of the best 3D printable statues.
This one using MakeShaper Natural ABS.
If you like printing figurines, I might suggest this color,
...or non-color in this case.

- - - - - - - - - -

I do like the 3D Systems Silver ABS from one of their printers...
And the bed wasn't heated!

Attachment 2883

- - - - - - - - - -

3D Systems Brown ABS meets 70 microns and 400 grit, followed by a course polish.

Attachment 2885

This takes on the look of a wood or stone ring with minimal effort.