e3DV6 can be user with original electronic?
Printable View
e3DV6 can be user with original electronic?
Hi guys!
Time to post some new pics. Finally got some spare time in the evenings, so after years of waiting, finally got some progress :D
Here are some pics of mk1 and mk2:
Attachment 4033Attachment 4026Attachment 4027Attachment 4028Attachment 4029Attachment 4031Attachment 4032Attachment 4030
And a small video:
https://drive.google.com/file/d/14cw...ew?usp=sharing
Nothing fancy yet, works ok, quality is good enough.
Waiting for the new board with 2209 drivers (sensorless homing) and optical probe, that will complete mk3 version.
After mk3 starts working, I will assemble it in the original casing.
If anyone is still interested, I will share some config and designs.
great work kiza!
I second that! That is some serious innovation.
Thanks guys!
My first 3DBenchy here. Supports didn't stick very well :D I'm still a noob at printing. I forgot to apply enough glue.
Attachment 4034Attachment 4035Attachment 4036Attachment 4037
ABS or PLA Kiza?
ABS, 240 degrees hotend, 110 - bed
Thanks. I'm surprised it is curling that much with a hot bed.
That was my fault. And of course this print did not end up well. I did not re-apply enough glue, the print popped up at the end of print.
The result:
Attachment 4039
Take 2:
Attachment 4040Attachment 4041Attachment 4042
https://drive.google.com/file/d/1Pfk...ew?usp=sharing
And the result:
Attachment 4043Attachment 4044
Okay, I am interested in an instructable or something similar. I have a cube3 that won't heat the hot ends and I want to do exactly what you just did. I will be using 2209 or something similar to get not only sensorless homing, but silence. I have a Cube2 that I did this with, and it works fairly well.
what kind of speeds are you getting?
That is one sleek looking model. Is there any reason why you used supports, other than you weren't sure that you have things configured well enough?