Printable View
When i did My First cube the only Things i Changed were electronics and extruders(Titan), as for the tft24 V1 from Btt, U will have to trimm Just a Bit of the housing to fit...hotglued in and its ok
- - - - - - - - - -
Attachment 4049
Attachment 4050
Thats what i mean...
- - - - - - - - - -
For original Look, U should Look at nextion 2.4 Display, and Programm it with a Cube Like Interface...;)
Yep, I've seen this post. Since BTT board has a connector, it's easy to buy an extension cable for it.
Example (not an ad): https://www.amazon.com/VSDISPLAY-Con.../dp/B07RQYRF77
Hoping to make it work. This way I will have the screen separate from the board, and there will be no need to cut anything.
Here is the finished print-head mk3, also designed to fit the original casing without modifications:
Attachment 4051Attachment 4052
That Looks nice, good work
Hello!! one question: where can i found that carriage for doble e3dv6? please help me
Just ASK kiza for the stlQuote:
Originally Posted by Ariel5227
There you go:
https://www.thingiverse.com/thing:4709467
That looks good Kiza, but I am wondering, I only see one actual heater block and nozzle there, do you just not have the other installed?
Yep, the other one is not yet installed. Will move to that part soon.
Quote:
Originally Posted by Kiza
really thanks a lot!!!
Kiza, you have my attention, and I have my non-functioning Cube3 (formerly Ekocycle), down to the just the frame. I am awaiting your instructible. :D