Cube3 File Editor

I wonder why it complains... Yeah, I that is the latest version.

Attachment 3561

The only security thing I mess with is installing Norton. All else bone stock.

What did "More Information" show?

App: <app-name>
Publisher: <listed publisher>
[Run anyway]

That is all that's added when you press the More Info button.

Oh interesting. I wonder whats up with that....

- - - - - - - - - -

I just rebuilt and posted a new version. let me know if works a bit differently. :)

It shows up as the same version... and the same notice. Pg1 link.

So, I had a request for an update to the editor. It is to change speed. This is a complex matter, do I just sdjust the movement speed without adjusting the extrusion rate? Do I somehow dynamically adjust both, or leave those both as manual adjustments for the user to change? I assume the latter, because this is going to change by filament manufacturer... So, any thoughts on what you'd want to see?

I never went there because I know the work required. You can do it with a common -while- M1/2/301; G1;;Fnnnn|S108 Snn.n = ratio F and S can track based on a formula. This is also where you might want to distinguish between #vector calls. You can ignore 'infill' type for instance but affect wall speed. Difficult to know how to best present any of this to the user. But it does lend itself to many possibilities.

With my original request to modify feed speed (M108) was to apply a common ratio of plus or minus filament for a given speed. The same should hold true in reverse. You could leave the feeds along and just tweak the speeds of all G1 calls. I'd do it the same way; just apply a ratio to the whole field or tweak selectively. Take all >8000 and leave them alone [lock them] with option to unlock in an advanced 'I know what I am doing' mode.

What I learned with temperatures is that you need to understand the file structure to generically change values after the slicer has done its work. This should and could be done before the slicer. Have you had any luck re-coding the XML config files? Just curious if you had another chance to look at them. Last time was checksum difficulties, was it? Opening up access to the slicer has all kinds of options, including larger platform size for CubePro size prints.

Hello friends! Can you give me a specific installation guide with images or videos

Buddy? yamaruchi - simply install the program. There are a lot of options and several nuances. Load it up and have a look around. Maybe have a specific tasks you would like to accomplish?