Search:

Type: Posts; User: dougk12

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    118

    It looks like your z gap needs to be loosened up...

    It looks like your z gap needs to be loosened up a little. I recommend the calibration print files, especially when changing to print in Nylon or Wood. Some filament types need a little more of a...
  2. Does anyone have the ManualPatch.zip re: Invalid Serial Number error on Cube3?

    I am at the tail end of repairing a few Cube3s and hoping to save a spare board with the Invalid Serial Number issue.

    My board shows as FW v1.07. I have a good V1.14B board right next to it but...
  3. I'm excited to see this project completed Jammin....

    I'm excited to see this project completed Jammin. I know you've put a ton of work into it and with zero prior experience with the CubePro that is no small task. Please keep us informed once you're...
  4. Replies
    5
    Views
    847

    Awesome! Always happy to hear about another Cube3...

    Awesome! Always happy to hear about another Cube3 avoiding the landfill :)
  5. Replies
    5
    Views
    847

    Hey Wiz, I have a spare one of these that you are...

    Hey Wiz, I have a spare one of these that you are welcome to. It appears that you've removed the linear rail seat, which I believe is a no no. I can see one of the balls missing in your pic.
    ...
  6. Sometimes when my auto-calibrate is off and the...

    Sometimes when my auto-calibrate is off and the printer doesn't detect it, I adjust pads 2 and 3 (pad 1 - upper left hand corner shouldn't be adjusted) one way a 1/2 turn and then re-run. Another...
  7. Replies
    9
    Views
    848

    Yes, look at the next post down :) I know he's...

    Yes, look at the next post down :) I know he's already moved the printjet assembly but I bet he still has this.
  8. Replies
    26
    Views
    5,621

    No, not at all. I've always wrestled with getting...

    No, not at all. I've always wrestled with getting the filament to catch when reloading. Not sure if this is a common issue or not but it was very frustrating for me. This solves that and the only...
  9. Replies
    26
    Views
    5,621

    That guide is held in place with nuts & bolts. It...

    That guide is held in place with nuts & bolts. It appears you are missing a couple at the top of it.

    I would recommend losing that altogether. It's purely aesthetic and serves no functional...
  10. Replies
    26
    Views
    5,621

    The small triangle that goes in the bottom right...

    The small triangle that goes in the bottom right hand corner of that assembly uses a longer bolt and mounts threw the bottom right hand hole. It isn't required - I believe it's purpose is to prevent...
  11. Replies
    2
    Views
    557

    Hi, I'm interested in the printjets and system...

    Hi, I'm interested in the printjets and system board (if you have the activation PIN or S/N). Please PM me.
  12. Replies
    3
    Views
    732

    Ah, what a shame :(. Send me a PM, I can make...

    Ah, what a shame :(. Send me a PM, I can make good use of the chips.
  13. Replies
    3
    Views
    732

    Sorry to hear that but I am interested and...

    Sorry to hear that but I am interested and sending you a PM.
  14. Nah dawg :) the only thing that printer cares...

    Nah dawg :) the only thing that printer cares about is the chip on that cartridge. If the material code filament type on the chip matches the material code filament type in the print file, it will...
  15. I'd like to get a hold of that modified version...

    I'd like to get a hold of that modified version of Eko firmware. Did you find it on this forum? I tried using the Cube Toolbox on a number of Eko firmware versions but no luck.
  16. Oh, you were able to use the toolbox to modify...

    Oh, you were able to use the toolbox to modify the EKO firmware so the cart never goes down? I wasn't aware that was an option! It absolutely works for the Cube 3 but I was under the impression that...
  17. Cool! I would advise that OEM ABS = good but...

    Cool!

    I would advise that OEM ABS = good but OEM PLA = bad. PLA is made out of corn and is compostable, even if it's been sealed in mylar for the past 5+ years it's very brittle. And there is no...
  18. Ohhh, 200 micron (.2mm) print resolution. OK, in...

    Ohhh, 200 micron (.2mm) print resolution. OK, in that case it looks like you have a partial clog, damaged/swollen internal PTFE tube or are using retail ABS that doesn't work well with the OEM...
  19. Yep, I use Elmer's purple for all but large PETG...

    Yep, I use Elmer's purple for all but large PETG prints. It's almost as warp friendly as PLA.

    For firmware swaps, I recommend:
    EKO -> Cube 3 OEM -> Cube 3 modified (PLA, ABS and INF chips at 98%...
  20. Awesome! Just in case you weren't aware, you can...

    Awesome! Just in case you weren't aware, you can easily swap between EKO and Cube3 firmware. I put a video showing how to do it out on YouTube when you're ready to knock down some PLA or ABS parts.
  21. Hi and welcome to the forum. I am assuming...

    Hi and welcome to the forum.

    I am assuming you're using Simplify3d(?) based on your settings statement. It appears to me that you are under extruding. 6 top layers is plenty to get a nice...
  22. Replies
    37
    Views
    11,324

    Oh no, sounds like there is a disconnect between...

    Oh no, sounds like there is a disconnect between you and S3D there. First of all click the "Show Advanced" button in bottom left if you are seeing the simple GUI.

    You want to adjust "Extrusion...
  23. Replies
    37
    Views
    11,324

    I haven't messed around with PETG in my pro yet...

    I haven't messed around with PETG in my pro yet but my Cube3 PETG profiles are set at 250C and a feed rate of 1.07 (vs. 106 for PLA). I would start around there and lower the chamber heat...
  24. Hi Wiz, awesome news. It sounds like you are well...

    Hi Wiz, awesome news. It sounds like you are well on your way to fully unlocking that Cube3.

    I personally use Elmer's Purple with PETG but I will use Cube Glue for the bigger prints. I will also...
  25. +1 to tossing old PLA. PLA is made out of...

    +1 to tossing old PLA.

    PLA is made out of corn, is compostable and decays. If that cartridge is nearly full, you'll need to spend 8$ in new retail PLA to make up for the amount being tossed.

    If...
Results 1 to 25 of 94
Page 1 of 4 1 2 3 4