Search:

https://www.thingiverse.com/thing:4262905

You can try My Design If you are Not using the original cartridge...
All the extra parts needed is a spring and an Bolt...
For the Chip U could Design...

Im considering to sell My Marlin Cube3...(SKR 1,4, tmc2209,2x Titan Extruder)
Anyone Interested? Im based in Germany...
Thats the Grey one from My Marlin Cube3 thread

Did i Start this Frenzy?:D

If U are going to be converting to Single hotend, Just use a V6 with an Titan and a Pancake at the top... U are Limited with Speed anyway...

- - - - - - - - - -

So U will gain in Print...

Thats really Overkill Kiza...way better than My build...
My cube3corexy is currently on hold ..

Nice Work, dont you have any concerns about the heatbed cables?

Get in Touch with Kiza Here in Forum... He hast found some nice sollutions or Look at My Threads ...
I have used an anet MK3 160x160mm HB with an external 12V PS, and Made a printed custom mount

Yes i used the original cable and connected IT to LCD Display, the USB C is connected to USB C Port in the mobo
You can weld a connector or weld to Pins... The original Boards are Essentialy USB...

Nice... My cube3corexy build ist sadly on hold for the Moment...

Optical Sensor on an Glass surface its a Bad Idea... Put some sort of
Printfilm surface on original bed (lokbuild, or Chinese Copy of IT)... With Glass would i say capacitive Sensor or bltouch...
...

Zipping it might Help...

You will have to calculate how much current you Need for your heatbed... The original PS will Not be enough My guess is you will have to Go 12,5-15A to have decent heatbed power

Just ASK kiza for the stl

That Looks nice, good work

When i did My First cube the only Things i Changed were electronics and extruders(Titan), as for the tft24 V1 from Btt, U will have to trimm Just a Bit of the housing to fit...hotglued in and its ok...

For the Screen you can See My instructable, you will have to trimm a Bit of plastic away, to Print via USB U can make a custom cable Extension to use the original Port at the right

You have to Compile Marlin the right way...
Post your configuration.h and configuration.adv in a ZIP here

- - - - - - - - - -

I have a Bunch of printers running custom configs here...
Tevo...

Thanks, this cube is actually being reworked Into an corexy system...

Currently redesigning the xy pulleys Position, to get All belts parallel to axis

Thanks... Im thinking about aditional Material thats going to be needed:
2 linear rails, or 4 8mm rods with lmuu8 bearings,
4 more idlers (i will reuse all the original ones)
A few metres of gt2...

And using slicer of your choice natively... ��
Cura, S3d, Slic3r you Name it... And using it with raspberry pi gives you camera and....
The best you can make is to make IT run reprap fw(Duet3d...

What has All that to do with this thread?

Im thinking of rebuilding one of the cubes to corexy... Using the frame as xy gantry... The z... Becomes y, the x going to be x on the y,
The frame mounted in a 4x3 1litre Cola Box and inside there...

Here you go
https://drive.google.com/file/d/1q_DzmU8qUGvDglxYVdY0yhZK96jva3bN/view?usp=drivesdk

Has anyone thought about it? Repurposing the linear motion parts...
Anyone who knows me... Knows i have crazy ideas regarding cube3 ��