Search:

When you insert a 100% cartridge, the system does a priming at the temperature appropriate for the chip, also purge operation figures temp from chip, so if you use a filament that takes a higher...

Also if the nozzle is not fully in the detent, you will get that error. When I started to get that error once before, one of the nozzles had worked loose - just a slight twist and I was back in...

FWIW, I've been using an old smartphone to get a video feed from the Cube3 printer - download IP Webcam from the app store, it creates a webserver for the local network (i.e., 192.168.1.67:8080 in my...

Brave? Well she doesn't know (yet...)

Yes, I think I did send twice because nothing seemed to be happening.

Turns out the computer was wanting to reboot anyway because of a pending Windows...

I have one more PC in the house - my wife's notebook - so I tried it, and it actually did load. I use all of my machines for embedded development, so I'm guessing that I have another driver loaded...

:-) - yes, that's the only one that the cable will plug into...

Nothing visible (like the notification that says "loading Drivers"), but USB Serial Port did show up in Device Manager.

I don't know what I'm missing, because I've tried this now on three Win10 machines. Please don't worry about it - I will stay with Fusion 360 and Cube Print - that works OK for me.

OK, well I definitely don't have those files...

3628

I look thorough the printer drivers installed from the SDK, and there is no CUbe3 printer - can you check in C:\Program Files (x86)\Microsoft SDKs\3D Printing\Code\Devices - I only show...

Sorry to send you down that path.

I get hung up on the "Win10 installs the driver for the newly found device" - that does not happen on my system. Does it install as a Cube3 printer, or does it...

3D Viewer is installed in Windows 10 - I think you have to download 3D Builder from the Microsoft App Store, but it is a free download.

When you go to the Start menu, 3D Viewer is right near the...

So much to learn. Thank you for getting me started.

One more off-topic question, and I won't bother you again (at least in this thread) - you have mentioned 3D Builder several times. How do you...

OK, that makes sense then. So a 2/3 adjustment on the retraction is a common change that we should make on all files.

Now temperature - is there some rhyme or reason on how Cube Print determines...

Since your last message, I have just downloaded and installed Cubepro... Is there a way to build a file from Cubepro for the Cube3? It looks like a lot more options for the slicer...

- - - - -...

OK, I don't understand the retraction settings at all. Here is a screenshot from the editor - what should I do? (Sorry to be so needy...)

3624

Yes, I saw the quick connect versions up on Thingiverse, but conceptually, I liked the newer ones better. The nozzle fitting on the quick connect version is only held together by the U-clip,...

Buddy - your software is awesome. I was intimidated by a post with 23 pages of comments, but I read the first couple of pages, then the last couple of pages - then I figured I would just download...

Here is a picture of my setup: (some of this may look familiar)
3619

My first modification to combat the constant jamming of the original cartridges was to cut the top open, because I thought...

No enclosure. On a shelf in a closet - mostly to manage noise, but closing the door does leave it in a dead air space.

I wanted to print at 70um to see if there was better detail, and I was...

So here's my Benchy fleet:

3613
3614
3615
3616

So I'm hoping playing with temperatures helps, because otherwise I think the morale of the story is going to be don't use the 70 um setting.
...

So I have not tried using buddybu's editor yet. I guess I need to learn that.

In the meantime, I am trying two Benchy's in opposite corners, so that should allow additional cooling time as...

I was wondering if it might be that the fans on the hotend were blowing on the front of the Benchy but not the back... Trying to figure out what could be different.

For some reason, it is not...

Hi Bolson - I did not even realize that I used the word "perfect" - I was just getting carried away making my point... Yes, even the good side isn't great, but to my mind it was acceptable given...

Oh yes - I guess that would be helpful to know. It is PLA, Overture brand from Amazon. https://www.amazon.com/OVERTURE-Filament-Consumables-Dimensional-Accuracy/dp/B07PFS2R12 if that makes a...