Search:

Type: Posts; User: PcS

Search: Search took 0.00 seconds.

  1. It is and yes .922 is what I'm running. Very...

    It is and yes .922 is what I'm running. Very happy with it . Auto level supposed to come in
    93 next week. And yes all those plastics work with the hairspray on aluminum . Some even stick without...
  2. I use Garnier fructise extreme hold hairspray...

    I use Garnier fructise extreme hold hairspray ...number 5. It works for everything. I should mention the aluminum plate has been sanded to give it some grooves to grab. Or it can be bead blasted. I...
  3. One quarter inch thick aluminum plate milled...

    One quarter inch thick aluminum plate milled perfectly flat.
  4. https://drive.google.com/file/d/0B6Rin2urJZxvcUNNd...

    https://drive.google.com/file/d/0B6Rin2urJZxvcUNNdW1rQ1F1djg/view?usp=docslist_api

    Link to my makergear m2 printing from fastbot bbp1s .
    Still have some tweaking to do but it is getting very...
  5. I have used the dongle that came with my pi Rev b...

    I have used the dongle that came with my pi Rev b bundle. It works fine as far as connecting to it with phone tablet or wifi enabled laptop. I do not however see a way to add it to my existing wifi...
  6. The Manga screen looks interesting. The biggest...

    The Manga screen looks interesting. The biggest reason I went with a bbp over smoothie was that they were...are using marlin firmware which I get along with quite well. It is unfortunate that it is...
  7. I might give it a slice in cura and try. Simplify...

    I might give it a slice in cura and try. Simplify 3d was a no go for my model. I don't hold much hope for that though.
  8. You will need to use another board if you...

    You will need to use another board if you actually want to be able to print anything.
  9. I am using it on a makergear m2. I can't use .922...

    I am using it on a makergear m2. I can't use .922 as I does not let me edit change or save printer profiles. I tried it using Chrome via wifi ethernet and usb. .920 mostly works as far as getting...
  10. .92 is out have not had a chance to test it yet .

    .92 is out have not had a chance to test it yet .
  11. Any news on a .92 patch ?

    Any news on a .92 patch ?
  12. Excellent news ! Thanks for you hard work testing...

    Excellent news ! Thanks for you hard work testing these things ! This helps ease my mind a little. Like I said before this will be the board to own when the software is ready. On a side note I did...
  13. Of another note looking at linked stuff he has a...

    Of another note looking at linked stuff he has a 19v m2 with the older stepper motor. Mine is 24v with the upgraded z stepper . :-)
  14. If I switch z to x or y the problem goes away....

    If I switch z to x or y the problem goes away. It is only the z driver. And at default m2 currents it is totally useless. Which from memory I think was set to 165 . It will run a little at 800....
  15. Let us know . I knew going in there would be...

    Let us know . I knew going in there would be hurdles. I was able to start a print and get a few layers but the z stepper issue killed it.
  16. This seems to be one of my problems. Looked at...

    This seems to be one of my problems. Looked at git hub today and it has changed to false. May have to reload software .
  17. I have this board installed on my makergear m2...

    I have this board installed on my makergear m2 and in its current form it is not usable yet. The z stage drifts badly if it moves correctly at all. I switched z to x and z perfoms as expected .No...
Results 1 to 17 of 18