Search:

Type: Posts; User: dougk12

Search: Search took 0.00 seconds.

  1. Nah dawg :) the only thing that printer cares...

    Nah dawg :) the only thing that printer cares about is the chip on that cartridge. If the material code filament type on the chip matches the material code filament type in the print file, it will...
  2. Cool! I would advise that OEM ABS = good but...

    Cool!

    I would advise that OEM ABS = good but OEM PLA = bad. PLA is made out of corn and is compostable, even if it's been sealed in mylar for the past 5+ years it's very brittle. And there is no...
  3. Ohhh, 200 micron (.2mm) print resolution. OK, in...

    Ohhh, 200 micron (.2mm) print resolution. OK, in that case it looks like you have a partial clog, damaged/swollen internal PTFE tube or are using retail ABS that doesn't work well with the OEM...
  4. Hi and welcome to the forum. I am assuming...

    Hi and welcome to the forum.

    I am assuming you're using Simplify3d(?) based on your settings statement. It appears to me that you are under extruding. 6 top layers is plenty to get a nice...
Results 1 to 4 of 4