Search:

I thought we are supposed to have a one year warranty. Obviously they are not going to honor their words.

One thing that is unfortunate for me is that I purchased the LCD without knowing my...

I have quite a bad impression of them honestly and I don't understand why some people choose to defend them. All their losses always seem exaggerated and not to mentioned months of email and lies...

I would like to try reprogramming the firmware before concluding it is a hardware issue. USB is totally not detected (device manager in Windows has no changes at all) so nothing can be done on USB...

Sorry, didn't reply for quite some time as I didn't have anything to print (or rather, gave up the project because of the situation). Will try what you suggest the next time.

Anyone have any idea...

From what I observe, it the printer detects the file on the SD card and starts the job from it,

1. Home all axis
2. Heat heatbed to set temperature
3. Heat extruder to set temperature
4. Move...

Slice, save auto0.g into the root of the SD card, plug in SD card, power up and wait. If ~5 seconds passed and no reaction on the printer(homing of all axis), then power cycle the printer till it...

Hi All,

I have not used my printer for about a month and when I used it recently, it started crapping on me.

Firstly, it will connect to Repetier and could heat up the extruder and heat bed,...

Am I the only one that did not have the spanner included?

Thanks everyone! I finally managed to assemble it by bending the frame. The rectangular bars are quite consistent (they probably already bought it as it is). Unfortunately, now I have the feeding...

It is in reality about 1 to 2mm out and I think that is because some of the larger measurements I made are using a ruler (which has less precision than that caliper). I just hope I have the strength...

Sorry for the delay in replies. Firstly, Ethan will not offer any useful help. I had enough of BS from him. I know some of you had good luck communicating with him. I did not.



Thanks for...

251 with plastic. Quite disappointed when I saw that frankly.

I have done that initially but the assembly could not fit and that made me to try another method to ensure that it is not a manufacturing fault but it looks like it is now.

Not sure how Ethan...

Thanks for all the inputs!



Actually, I have tried making the frame sit on different positions on the bed (around center, front, etc). But I don't think it should matter as the sides of the bed...

Hi All,

Would need some help. After I assembled the frame, I tried to put it on the base but it couldn't fit. I thought I didn't align the screws on the frame properly and the support legs are not...