Search:

Oh, the re-using the LCD is the key to my missing link, thanks! Indeed perfectly good reuse fodder. I wonder if there are extension cable without the PCB.

That black plate the wire holder is...

Holy cow that's purdy!

You know we want to see and hear more of that hack right?

Looking sweet!

I haven't seen any differentiation in firmware for the 3 CubePro offerings, bolsoncerrado.

I suspect the F/W poles the connectors to see if an extruder is wired in.
Maybe it requires...

Definitely wasn't thinking of sharing a single supply - more like dedicating separate supply to the heater. They cost less than $20.

Peeling the white stuff from the base build plate might not be...

What's a good thermister and connector? Trying to maintain some level of commonality.
You're talking 5 amps at 24V so the standard power brick for the Cube3 will work; aim a little under 120...

Crap, I had completely overlooked that. We can easily make custom heater boards cheap.

- - - - - - - - - -

Kiza, what trace-resistance are you aiming for and for how many watts?

I must admit I don't have the structure in mind well enough to see what I am looking at.


https://www.youtube.com/watch?v=QbRjDr8IeXc

According to the video, the nozzle is one piece and...

That nozzle on the left looks bent. Which one is loose?

Hey jammincomedy. Welcome to the forum. There are two ways the nozzle can remain loose, a screw that clamps the tube in the housing and the one holding the housing to the frame. I would recommend...

I do not know what it takes. I have always assumed that if you have all the connections made, the 3rd extruder would be enabled. Not the case?

Welcome to the forum trevazee.

Diggum is correct; V1.1 was a failed release on too many levels and was purged.

Don't forget to explore the ReCube option.

I have some NOS ABS carts I will parts with. Worthwhile as a pair shipped Priority Large Flat Rate.

Buddy, your editor is a God-send for my 3D printing efforts.
I use the editor exclusively for all PETG submissions which is my goto material.
If there was a 'send to print' option from the...

What Buddybu said. I never handled the Pro upgrade. Each Pro code-build by Tomuro is custom to your order. There is a help thread for those that need some guidance.

And of course, good show on...

Soooo purdy! :p

I definitely want to follow progress on that new beast. That looks like fun. Merry Christmas!

Thanks. I'm surprised it is curling that much with a hot bed.

ABS or PLA Kiza?

I second that! That is some serious innovation.

I'm not but one of our own is - https://www.ebay.com/itm/3D-Systems-Cube-3-Cube-X-Cube-Pro-Ekocycle-3D-Filament-Cartridge-Refill-Resetter/153900451809
Same unit, same function.

Wow, that texture... sweet!

One of the hopes of 3D systems was to put a 3D printer in every home. Something about complexity squashed that dream.

Glass is a simple hack. Not choice with PETG. Haven't had an interest in heaters. To get things going, I use the hot air blower from Harbor Freight. Replaced the stove to take the chill off. ...

Hey Buddy! I'm sorry to hear that. Prayers to you and yours.