Search:

That is the most unique and clean implementation I've seen on any repurpose to date. 4 years well spent! Great vision.

Did I miss a screen swap somewhere?

I did indeed! Love those little fixers ;]

Bravo Kiza! That is above and beyond awesomeness!

http://www.print3dforum.com/showthread.php/3024-3DS-Cube-File-Links?p=50599&viewfull=1#post50599

Read through the thread of my build RicciEU. When you get to the part about 'you can do this is a NANO and 2.2K resistor', stop and realize I was no different than you taking on this challenge. The...

RicciEU, Cubify, the code that drives all the prosumer 3DS printers, is a canned program. This means all recipes are created and fixed based on the material chip presented. There are external...

^that!

Great stuff Doug. I wish I had time to put into S3D.

The take-away is that CubePro is backwards compatible with older file types. CubePro 2.02 operates on a whole different level than the...

Definitely the nozzle end ;]

4112

I've been running NovaMaker white PETG almost exclusively for the last 3 spools.

Yesterday I was getting some clicking. This is what I found - the 42mm tube was nearly completely...

That is great Arcadium. One cartridge will be sufficient. Be sure to apply the modified f/w to keep you chip from counting down if it has a usable percentage left.

I've run a pen-spring before.

If you back up to V1.87, you can modify the files for CubePro. There you can set the temperatures. PETG seems to want about 10-15 degrees less than Cubify ABS. I set the temp to 250C in Cube3. ...

Good point buddybu. A nozzle and chip can ship in an envelope if you separate the push-nut.

Now that is some serious integration!

Interesting. I don't know enough about the code to know how that could be.

Are you at the edge of the microprocessor's memory?

Very nice wire dressing!

LOL I literally do not level my printers as I leveled them once without leveling compensation being active.
http://www.print3dforum.com/showthread.php/1165-Z-ticks
Actually, I still have one tick...

I guess I never noticed a yellow.

Oh... that works with the reflector for gap sensing.

Yellow light? Basic lighting in the stock cube3? It just turns on when the system is active with a F/W toggle.

Thank you for that!

Wow, Way Cool! Thanks for the pinout!

Why not put the lights on switch that turns off when the tray rests on the bottom. No need to add a bunch of stuff.