Search:

So you may have read this in other places but I am here to say it's true.
Different filament behaves differently.

Using Red Hatchbox 1.75 PLA, I had finally gotten some settings that were giving...

Resolution!
So I finally did get in touch with someone from "Creality 3D Direct". This is Creality's official storefront on Amazon. Contacted them through Amazon and then got an e-mail address so I...

I have noticed that some of the X and Y axis wheels are getting "chewed up" on my CR-10s.
It seems to be just the outer edges of the wheels that are effected, as if they are being scrapped along a...

So as covered in another post, the control knob on my CR-10s seized up. Wouldn't push and would only turn by removing the knob from the rotary switch and using a screw driver in it's shaft.

This...

Update: So I replaced he switch and all went well. Took more time to get the mounting screws back in than it did to install the part. Actually, the most stressful thing is that I was an idiot and...

UPDATE - Well, my new switch(es) arrived.
Now I have the existential decision to make.
Do I install the switch and probably be up and printing again 30 minutes from now ... or do I wait and see...

Sorry I have no idea for what is going on but wanted to chime in and say that I actually received a reply from Creality this morning.
They were responding to an e-mail I sent them last Friday (it is...

()Keeps out cats who might decide to "play" with the moving printer.
()Prevents sudden air movement from an AC vent from effecting your print.
()Might help to contain some of the axis motor noise....

I was wondering if you ever "solved" this one?

So it was fairly easy to remove the switch from the board.
There was no part number on it but I found an identical looking/functioning switch on Amazon. It's spec sheet has the same physical...

That's kind of what I am thinking. It must surely be a warrantied item ... but I haven't heard anything from Creality and I think I saw a note that said they would be closed for a week or so for the...

(RESOLVED 2/18/19 - details@ http://www.print3dforum.com/showthread.php/1717-Malfunction-Who-ya-gonna-call)

After working really well for a month, the knob on my CR-10s control box has frozen up. ...

FWIW - My CR-10s takes about 5 minutes to warm up to 75C.