Search:

The firmware is an adapted version of Marlin.
The adaption is simply the configuration of the wiring (ramps ports), dimensions of the printer, speed, etc.
It should be easy to get the latest Marlin...

https://github.com/MarlinFirmware/Marlin/releases

I was thinking about building a software to do that.
What exactly are you trying to achieve?

Your forum because it is not working with HTTPS is being lowering the rankings on Google search. Someday they will completely remove HTTP only websites from their results, so be aware of that.
...

The redirect was happening to me because Chrome prefers HTTPS (and also Google SEO), and because I had the New Posts link bookmarked with HTTPS, even when going to HTTP it was changing to HTTPS....

LOL
No, it is not.

Maybe you can explain then what is the DNS issue?

#4 the red/black cables should be used to connect 12V output of the power supply to the board. Please be careful to connect correctly the Negative and Positive correctly, or else the board will burn...

I'm sorry to say but it has nothing to do with DNS servers!

It is the HTTPS not well configured and right now, at least that I've found, only the New Posts link is redirecting automatically to...

I've printed hundreds of things on it and still looks like new.
I might get another one just in case I get some unfortunate accident and ruin it.
This could be one of the following:
* Cutting it...

When it happened to me I simply reduced the temp a little bit and it stopped doing it.

I won't argue with you, you probably messaged the guy before removing the message and you were sure that it was a bot.
Me personally, didn't see any announcement of a 3D printing service, I had to...

It seems to be related to the HTTPS, but when landing on HTTP only it redirects to HTTPS automatically. So something is still not completely right.
1937
1938

The "New Posts" link from the nav bar is not working properly.
It shows an error.

Also, sometimes, and on any page on the forum, the server replies back with an error saying that it doesn't find...

It doesn't seem to be a generic answer because:
- Kossel XL is in fact a delta printer;
- It is particularly difficult to assemble because it comes completely loose, up to the screw level;
- The...

Really?? It seemed very legit message and question :)
But the bots are taking over humanity anyway, so who knows...

Short answer:Buy LokBuild and all your adherence problems are solved.

Long answer:
I've been through all of that experience and for me it was an enjoyable journey. I imagine it can be painful...

I don't know a tool that does that. I normally just use the browser inspector.

This topic should probably be continued on another thread...

@bolsoncerrado you should only switch to HTTPS when all content is served also with HTTPS. Until then it will misbehave for some users....

With the LokBuild I increased the distance from nozzle to the bed at least 0.1mm so the parts could get out easier.

I'm also using heated bed but I decrease the temperature when the model has some...

This is everything that you need to know: http://www.print3dforum.com/showthread.php/838-LokBuild-(a-new)-3D-Print-Build-Surface

I use cat litter.
Nothing beats its price and if I want, it can also be dried again on the microwave.

My room temperature is around 20C.

Anyway, the LokBuild is simply incredible.
The results after a few more prints continue to be always a success, even with some difficult corners or very small...

Done a few prints with LokBuild and the adhesion is in fact impressive.
Used only PLA for now but I had to completely disable any heating of the bed.
The 1st test with bed at 60˚C was very...

Hi EmracingDK
Can you share more details about that FR4 plate?
Thanks

Please keep us updated with your further experiments.

I am very interested to see how this works with ABS because for me it is the most difficult to print because of warping.