Search:

Alright so long as it is from the onboard sd card, the USB drive will not help us at all here. Your sd card folder is a lot different than what I remember having. Here is what mine looked like. Just...

Hey there Wiz. You're in luck as I have post notifications still turned on haha. I haven't touched the Ekocycle much since doing this whole thing as it has been working without a problem, so forgive...

4215

Started to experiment and took off the front of the spool and hooked up some Matterhackers black PETG.

4216

Printing was very smooth, no warping or layer adhesion issues. Filament...

Looks like an easy solution, good to know it exists and won't require much!

- - - - - - - - - -

42124208

JohnTee's version went through without an issue. Once it rebooted it prompted me with...

If it was simple enough I'd run some wires from each of the data pins to a sd card port on the outside of the printer, maybe a future mod? Haha.

Alright well I found that the drive was too big of a size to be read. I got a 16gb drive and that seemed to work fine. Bad news is the firmware file either is incorrect/corrupted or something I don't...

Ok I am using a 32gb drive with fat32 formatting, maybe it's the size. A lot of things don't like the micro sd to usb adapter drive so I don't think that would work anyways.

I am using stock...

Hi John, I wanted to give my opinion and say that it is not the .hex file that is printer unique. I was able to use Buddy's .hex when mine was corrupted. What I did need to change out however were...

Hi John, thanks for the reply. Yeah everyone helped out a lot and we got it from bricked to back up and running within a few hours which is fantastic! I haven't worked on it at all over the weekend...

Hey folks, I was wondering if Tumoro's software would work on an Arduino Micro rather than a Nano? I would think it should but since I'm here wanted to verify if that would be an alternative.

Interesting stuff, will definitely look into that and see what I can do. Thanks Tom!

- - - - - - - - - -




Only reason I think I'd ever go back to the stock firmware is if the company...

Okay I'll do some research on Tomuros program tonight and see what I can dig up. I'll also look into the Cube3Editor thread. Thanks for the help Bud, I'll be in touch.

For now, have a good one.

No problem removing the chip. I was going to create a piece that keeps the chip always connected and uses the same extruder housing piece to drive the filament.

This lite version I know is just...

Alright so what I'm getting is if I stay with the Ekocycle firmware, no PLA because temps are really high unless I modify every single print file. No problem, I can switch to Cube3 firmware then. I'm...

I have to give you a BIG thanks Bud, without your files I still wouldn't have a booting machine. Really helped me out there.

Also thanks to Tom for helping me troubleshoot. Now that its back...

Bingo! I knew that the Image695.hex was the issue. Its at least booted and lights, fans, and screen work. New issue, however I think I can fix that by using the original bin files that were on the...

Thank you! Will check now. Looking through the main corrupted file - Image695.hex, anyone know what the red means?

4173

In the entire 30k lines of code, this is the only red.

I keep going...

At this point, if anyone has any functional files they can send, I'd appreciate that. Since its non functional now I guess it doesn't matter what I throw into it since it won't even boot.

I'll...

Okay something to note. I was digging through my files and noticed that the ekocycle V1.05.ar file I uploaded was 16mb. Then searching through the Cube3_V1.14B_ar file I downloaded when I was trying...

Yeah I noticed that with the Google Drive links I posted earlier, not my Drive link but the other ones. I actually used the cubify_v3.04.exe and was able to install Cubify no problem so I think only...

Which part is corrupt? To my knowledge everything is corrupt. Basically the firmware install has a incorrect checksum and that ties in with the Image695.hex file but I don't know how to edit that...

I'd love to decode what each of these files is and how important each one is. Is there a way to do that and document the findings?

I found that the CONFIG.BIN is where the wifi SSID and password...

I found a lot of files for not only the Cube 3 and Ekocycle but also CubePro and such, I'll link it so you can check it out.

This is the Ekocycle so I wonder if it is supposed to have more than...

I thought I waited long enough. When it was done it said to press the button to reboot, which I did. Then it shut down for 20ish seconds then started to flash. During the reboot procedure I didn't...

Hello everyone, I wanted to make a thread about the Ekocycle 3D Printer because I don't think there is a lot of information about this printer available and the little information that is available...