Search:

Hey DRoo, Sorry for the late reply. Unfortunately I cant find any images of the back side. Now its all glued into the holder I printed so I can't open it.
Cheers RS

- - - - - - - - - -

Hey...

Thanks TommyDee, it really is like a new machine, new nozzles, print plate, and slicing software. But at the end of the day I had two choices, either Bin both machines or commit to updating...

Okay, So last week I purchased a copy of the Simplify 3D ($150). At the time I felt that I had no other option. As you can see from my post in this thread the 3DS slicer was not financially viable...

Doug12, you are an absolute gentleman. I don't know why but I was under the assumption that settings such as temp and feed rates couldn't be adjusted through S3D only through scripts. My bad. Thanks...

Doug12, Thanks for the post, I'll have a look on eBay for the CubePro profiles and give that a try.

Do you know the best way to change the feed rate and nozzle temp? Can I do that through the S3D...

Hello Everyone, I have recently purchased S3D software and downloaded the Cube-Utils conversion tool to convert .bfb file into .cubepro files. All seems to work really well the conversions are very...

Thanks Guys, I guess I'm going to have to bite the bullet and buy Simplify3D. It's just not economical the continue with the 3DS slicer. Simplify3D is the only option for improvement. My only...

Thanks for that TommyDee I'll give it a try.

- - - - - - - - - -

One other thing that I came across lately is some kind of clinch in the 3DS slicer software:

43604359

So if you can see...

Well I have been doing some testing since my last post and I can confirm what TommyDee and Doug12 are saying. The PETG formula does not like the Higher temp of the ABS settings of the CubePro. I have...

It's not an adjustment as such its down to the lateral pressure applied. Thats where the inserted piece of filament works as a spacer. I push mine up snug.

But that wasn't my problem. I will cover...

I agree. I think it starts out at the right temp but after 10 - 20 min the temp slowly drops to a point below the tg value of the filament.

So it shouldn't be the nozzle or the PCB on the...

Oh, sorry to hear that.

I actually have new nozzles and the problem in persisting. I was hoping you had found a solution.

Cheers,

RS

ercnbal, did you ever solve your issue? I am experiencing the exact same issue. Please share the solution if you have found one?

Cheers, RS

No sputter when purging any material, nice uninterrupted filament, straight, perfect really.

I have been reading in this forum where people are using PETG and other materials with no issue....

Yes, PETG as ABS in the slicer and using an ABS chip in the CubePro. It performs the same with ABS and PLA. First ABS went and it would only print PLA then it stopped printing PLA as well.

So I'm...

TommyDee, I'll let you know as soon as my PETG order arrives tomorrow or the next day. I am very keen to test the PETG in my CubePro.

- - - - - - - - - -

Okay, so my PETG did arrive the next...

Now that is really very interesting!
Have you had any issue with PETG? I have just ordered GIANTARM PETG as it has a temp range of 220 - 250c. So I am thinking that I can print it as ABS. I am just...

Hi Guy's, Sorry for the late reply.
I have been playing around with the Extruders and what I have found is the problem is solely with the aftermarket ABS . . . so far. Amazon ABS and Smartfil ABS....

Well it definitely not the firmware. Reflashed it and no change. I can hear a deep ticking which I am assuming that noise is the feeder slipping for some reason.

This is the gap test print:
...

It's ABS. I have spent the last two days swapping around print head assemblies between two machines and from what I can tell it appears to be a software issue. When I manually control the jet I can...

Hello all,

I have been having some very poor prints and I was wondering if anyone has any suggestions around what may be the cause and how I can improve the prints?

I am using a CubePro...

Cheers TommyDee

Cheers TommyDee, Would it really matter if I used an ABS orange chip with ABS black filament?

Thanks guys, I'm really quite happy with the project. I world involves structural aspects so the circuit and the Arduino were out of my realm, but once I understood how to deal with the BAT file,...

Hello All,

So I have my recharge wand finished. It works with my Chip Sled.

4262

4263

I'm still learning how to use Arduino IDE and the Serial Monitor but it seems to work quite well. The...