Though making it open source appeals, I just don't have the time (And perhaps all the skills needed). My kids will mostly be using it for small projects that they design in Tinkercad, so an oringinal...
Type: Posts; User: SteveG
Though making it open source appeals, I just don't have the time (And perhaps all the skills needed). My kids will mostly be using it for small projects that they design in Tinkercad, so an oringinal...
Thank you Razor81, I have not heard from 3D Systems so would like to try this to see if it would work, how much do you want for it?
- - - - - - - - - -
Yes, I read somewhere that if the MAC...
The serial matches the one on the box, although it looked brand new and was wrapped in the box it appears to have been dismantled, there are pry marks on the plastic case which I don't think would...
I just got a new Cube 3, thought it was a bargain, however I have not been able to activate it, I use https://www.3dsystems.com/support/cubify/activate which generates the 4 digit code, however the...
I have the same issue to ABS sticking to the print plate (My filament is old), you can try reducing the plate to print head gap, always works for me, if too tight it will stick really bad, can also...
Here are some pics of my attempt at duo conversion, there is no option to load the filament but I can load the filament manually using control jets, the application gets notification from the printer...
Please post your findings.
The Cubepro slicer can be downloaded as part of the archive here - https://www.3dsystems.com/support/cubify
Have a look at the activation site -http://infocenter.3dsystems.com/cubepro/user-guide/unpacking-and-setting-your-cubepro/setup-and-activation
A 4 digit pin is generated based on the serial number,...
Probably hand wound heater, should work if done correctly. The thermistor needs to be as close to the nozzle as it can get, The component in the fins is a thermal fuse, if you get a nozzle that won’t...
The main PWB is the same and all the components are there so i am guessing that it would be upgradeable but not without the right activation code or a firmware hack (Beyond my capabilities). I tried...
Came across this on eBay the other day, looks like someone in Brazil has developed a replacement hotend for the Cubepro with replaceable nozzles, looks interesting, would like to see a Youtube video...
I tried the conversion, even with the all the parts it will only let you load number 1 with filament, interesting when filament is in other stations the Cubepro app will show it as installed. I see...
Hi Tommy, I finally got some parts and tried the conversion, even with the all the parts it will only let you load number 1 with filament, interesting when filament is in other stations the Cubepro...
The head PWB has the connectors for 2 additional extruders and nozzles, the motherboard also has the additional connectors for cartridge bays 2 and 3 EPROM readers.
Looking at the Cubepro parts...
Thanks for your prompt reply Tommy.
From what I can make out there is just a lead from the main board to the cartridge holder, the cartridge holder then has two contacts that supply power to and...
I have a Cubepro single which I would like to update to a duo or trio. As all the feed tubes are already in place it looks like all that is needed is the cartridge holder (Though this does not seem...