Search:

Anyone successfully printed wood filament? If so, what settings did you use?

perfect. I'll send out another email to them with this attached to see what happens

that would be great Kiza, I know what a dxf file is but what is ai?

AFter the initial email, seems like my follow up email to them got lost. Kiza, do you have a file to get the exact location of the magnets? Im hesistant to "draw up" a template of where to put the...

minimum is 3.
With this coming into light, I have to step back and rethink how I want to control it. 24V, 12V, 110V?? Heard, uh, read that several use these, ...

I guess my issue, was how to put the heat element, whether it be a pad or self run copper wiring onto the current build plate or if I should affix it like a prusa build plate with the springs. I...

I see it now, shouldn't have jumped to it without studying it. Do you remember what length screws you used?

it just dawned on me, how is the extruder being held in other than just the PTFE tubing?

Kiza, can you share the file for the extruder Mk3?? I likes.

And dedication. Would have long given up!

my concern is how the heat mat will work with the current magnets on the cube 3. With my tornado and A8, the 4 levelling screws were made into the mat.

I attempted this exact mod. Well, before ya'll get excited, I ordered the stuff. Thats about as far as I got, I had this page bookmarked and a youtube page but cant find it....

Do some searching, there is some hacked versions floating around the net for S3D.

Nice. I likey it.
I have an MK8 on the way so next time my original gear fails for some reason, I may have to give this a try. Luckily I have a 2 junker printers and 1 that is being unused so........

Beat me to that question TD!

- - - - - - - - - -


TD, could something be designed to utilize the 2 screws on either side?

Welcome Yordibas! Would love to see movie details of your tasty MK8 model. Do tell!!

R81- could you do a close up on your design?

I have the electronics out and can easily get to them. I can take any photos you want

The only thing I see that would pose an issue is the sharp curves from the spool roll, out of the container, and into the drive. When you get toward the end of the filament, I find it gets brittle...

I have 2 tubes of the glue if anyone wants them. Just pay the 8.00 shipping and have at it. 1 is about 75% full and the other 60%.

I am batting .500 with craigslist luck. 1 works perfectly, 1% used on either cartridges and the other, hot end carriage busted. My advice, pass, use that 75.00 for a new on eBay like TD suggested.

I use an overture build plate that came with the filament. NEver once have I put any glue on it or tape and it sticks fantastic. Best build plate thus far!

I have one, well, 2. email me at ztoddman1@yahoo.com

I just downloaded that earlier today not knowing it was from someone here! Oh as well as the darth vader mask cap(?) Way Cool. THanks!

your ol pal!