Search:

Thanks for the reply, I checked out your designs but I don't see the filament loading or unloading files.

Hi, I am looking for the files from this post http://www.print3dforum.com/showthread.php/1014-Extruder-Hub-V2-FTF-(Free-The-Filament)

the part where is says "Download the Load Filament files here ...

Hi, what brand of PLA has been working for people these days? I have been printing with 3D solutech PLA natural clear exclusively for over 2 years, with amazing results. But I bought 4 rolls (all...

I do have some spare cartridges, enough to last me a while. I was just wondering if anyone knew the proper name for that part, so I can do some searching and try to find it.

I think the excessive...

Hey yall, it's been a while for me, I'm happy to see this forum alive and well!!

I am running the hacked firmware with the KISS cartridge method (just a regular cartridge with the lid cut in...

Yea... I will have to tear it down. Don't know when I'll get around to that haha.

Hi,

so one of my cube3's randomly shut down during two prints and I was fiddling with the power supply. I unplugged the cable from the outlet to the power supply at the power supply (so the cable...

Just want to chime in here.. You'd want to physically cut up the plastic parts of the nozzle so the bowden tube goes straight down into it (the bowden tube would arc over the top of the printer, e.g....

Hey just saw this deal,

https://www.ebay.com/itm/3D-Systems-Cube-3-Printer-Color-Touchscreen-Wireless-Connectivity-Grey-/292367331381#viTabs_0

160$ USD for a 'refurb' printer

Thanks for the trick, I will try it out.

Hi everyone,

So this problem of the cube 3 filament jamming in the print head due to many successive retractions has been discussed around this forum a bit, with an in-depth explanation by...

Hi, so a print failed again due to this 'pumping' problem. Parts I had printed many times before using the same settings and filament, failed on a tall, thin section (but really not that thin...)....

Hi,

I don't know much about the cube 3 specifically (I usually print on RepRaps) but I here's my take on it:

- yea don't put ABS filament in the printer and try to run it with a cube3 file...

Hi,

Didn't want to bump old threads so I thought I'd start a new one. So my Cube3 has been printing beautifully and consistently for months, but I am noticing that it is failing on tall thin...

Hi,

Taking the bed panels off is very easy. (Sorry for no pics, didn't think it'd be worth my time):

- lay the printer on its side, cartridge side down (this is because the bed prevents the...

So the there are only .cube3 files for the Loading, (and none for Unloading)? And you use the method above to unload it?

I ran the "Load_filament_PLA_Left" file and didn't quite understand what ...

When using this enclosure do you have anything to report about:

- temperature errors?
- overhangs? (do small overhangs print just as well in this enclosure as with open-air printer?), both PLA...

And now back to shooting the breeze...

Check out this 2 day print I did... Wut wuuut it blew my mind

2429

- - - - - - - - - -

Man my phone won't upload the finished plate... Oh well. 46...

Haha I must say this forum is shaaa-wwweeeeeeeeet!!!! Man I'm gonna do this to "my" printer asap!!!


p.s. it's not really my printer, my friend loaned it to me. It was such a pain in the ass...

I have the Lokbuild (orange sheet with black letters) which I have put directly on top of the stock build plate. The autolevel has been working great, works every time for me.

The trick is that...

Aaaaahh I see know, so what I gotta do is:

- fill up the plate
- hit build, then save to library
-then go to the library and click the model, then the 'info' button on the top bar
- it'll give...

hmmm good to know.

Hi,

Just wondering if code savvy person has found a way to estimate the print time of a .cube3 file ? (without having to go to the printer and print the file and see the estimate the printer gives...

Hey everyone,

So just wanted to post that after much hacking and struggling with this printer, and after lots of helpful info on this forum, it is finally running smoothly consistently. So now I...

check this thread:

http://www.print3dforum.com/showthread.php/907-Use-other-slicers-with-cube-3?


p.s. search the forum before you post