Search:

I performed the same mod as Jetguy (Thanks Jetguy!) which seems to be working quite swimmingly:...

Awesome! I assume you are using firmware v.922?

When you say it works for 'everything', what does that include (e.g. PLA, ABS, PETT, PETG, NYLON, HIPS, Ninjaflex, etc.)?

I had planned to use...

Yes, I had assumed that WiFi and camera would work simultaneously via a USB hub. What I was most interested in finding out was if I could use the microUSB port for either the WiFi or camera so that...

Thanks! I think I may have a USB dongle from an old Pi - I'll have to look for it. I will also try it with a USB hub and the camera and see if that works. I just realized I also have a USB OTG...

Has anyone used a USB WiFi dongle with this yet and if so which one are you using? Do you know if you can use the microUSB port as well in order to have a camera and WiFi simultaneously?

Are you getting any prints out with this board yet? What is the current status of your testing?

It looks like we'll have a backup if they don't get the firmware sorted out...

https://www.kickstarter.com/projects/1924187374/replicape-a-smart-and-quiet-3d-printer-control-boa

I would end up...

I have a cheap MKS board that I have already had hooked up and can swap back if needed. I can also try to use Simplify3D if it just comes down to a slicing issue with the current firmware. Will...

I am using it on a CoreXY printer I am in the process of building (almost complete):

http://www.openbuilds.com/threads/h-bot-corexy-cube-with-fixed-build-plate.1528/page-3

Testing .9.2.2 now with generally positive results (minus a few niggles which should be quite easy to fix). Waiting on G29 auto-leveling support but will report back with findings as I proceed...

Appreciate the data point and additional warning! I will definitely take it slow and report my findings. I have a cheap MKS v1.2 fallback board that seems to work fine - I will use it until either...

I haven't installed my bed or hooked up the heater but I am using a 600W 120V heater using a solid sate dc to ac relay. I'll have to see how it performs with the current config. I do have one of...

Well said.



With the exception of an onboard 5V regulator (which I have already installed, thanks for the tip!) the basic hardware design looks decent. Though we are still awaiting an LCD ...