Search:

Type: Posts; User: RicciEU

Search: Search took 0.00 seconds.

  1. Okay, So last week I purchased a copy of the...

    Okay, So last week I purchased a copy of the Simplify 3D ($150). At the time I felt that I had no other option. As you can see from my post in this thread the 3DS slicer was not financially viable...
  2. Thanks Guys, I guess I'm going to have to bite...

    Thanks Guys, I guess I'm going to have to bite the bullet and buy Simplify3D. It's just not economical the continue with the 3DS slicer. Simplify3D is the only option for improvement. My only...
  3. Thanks for that TommyDee I'll give it a try. -...

    Thanks for that TommyDee I'll give it a try.

    - - - - - - - - - -

    One other thing that I came across lately is some kind of clinch in the 3DS slicer software:

    43604359

    So if you can see...
  4. Well I have been doing some testing since my last...

    Well I have been doing some testing since my last post and I can confirm what TommyDee and Doug12 are saying. The PETG formula does not like the Higher temp of the ABS settings of the CubePro. I have...
  5. It's not an adjustment as such its down to the...

    It's not an adjustment as such its down to the lateral pressure applied. Thats where the inserted piece of filament works as a spacer. I push mine up snug.

    But that wasn't my problem. I will cover...
  6. I agree. I think it starts out at the right temp...

    I agree. I think it starts out at the right temp but after 10 - 20 min the temp slowly drops to a point below the tg value of the filament.

    So it shouldn't be the nozzle or the PCB on the...
  7. No sputter when purging any material, nice...

    No sputter when purging any material, nice uninterrupted filament, straight, perfect really.

    I have been reading in this forum where people are using PETG and other materials with no issue....
  8. Yes, PETG as ABS in the slicer and using an ABS...

    Yes, PETG as ABS in the slicer and using an ABS chip in the CubePro. It performs the same with ABS and PLA. First ABS went and it would only print PLA then it stopped printing PLA as well.

    So I'm...
  9. TommyDee, I'll let you know as soon as my PETG...

    TommyDee, I'll let you know as soon as my PETG order arrives tomorrow or the next day. I am very keen to test the PETG in my CubePro.

    - - - - - - - - - -

    Okay, so my PETG did arrive the next...
  10. Hi Guy's, Sorry for the late reply. I have been...

    Hi Guy's, Sorry for the late reply.
    I have been playing around with the Extruders and what I have found is the problem is solely with the aftermarket ABS . . . so far. Amazon ABS and Smartfil ABS....
  11. Well it definitely not the firmware. Reflashed it...

    Well it definitely not the firmware. Reflashed it and no change. I can hear a deep ticking which I am assuming that noise is the feeder slipping for some reason.

    This is the gap test print:
    ...
  12. It's ABS. I have spent the last two days swapping...

    It's ABS. I have spent the last two days swapping around print head assemblies between two machines and from what I can tell it appears to be a software issue. When I manually control the jet I can...
  13. Poor prints - CubePro Duo/ 2.02 firmware/3ds slicer - Help?

    Hello all,

    I have been having some very poor prints and I was wondering if anyone has any suggestions around what may be the cause and how I can improve the prints?

    I am using a CubePro...
Results 1 to 13 of 13