Search:

Print one yourself.

https://www.thingiverse.com/thing:2735871

How does $30 shipped for 2 chips and 2 nozzles?

Cheers


JH

I have few extra chips (full) and nozzles. What do you need?

Yes, w S3D the print displays more artifacts and layer lines...but I have not had time to mess with the S3D settings more.

Yes, CubePrint supports are terrible at best. I switched to using...

The left fan was not working, were I was experiencing extruder over-heating...


I ordered this one:
...

Awesome.

I was thinking it would be cool to try a multi-material print w flex and abs...

Great idea! I might try that in an effort to find one long-lost spring...:-)


PS: The PC+ Nozzle is still holding up. :-)

- - - - - - - - - -

Found a few errors in my Nozzle file, so I...

:-)

That has been soo helpful! Was able to open my cube to replace the stepper, turns out it was the fan was dead, replaced the stepper anyway. Replacement fan should arrive tomorrow.

FYI...OSX and IOS are different things, OSX is Mac computers, IOS is iPhones and iPads...

:-)

I wonder if using MeshMixer to make your own supports and then S3D to set-up a "multicolor" file with one "color" assigned to the supports (PVA), the other PLA?

I have an Ace hardware next to where I work, I will have a look tomorrow.

:-)

I am sorry it was so hard to print on the Clip on the Cube.

I will try it on my own soon, after I find a way to address supports on the cube as Cube Print supports really mess things up... Hello...

Hey TommyDee, thanks for asking.

I did not add the thread you suggested/provided to the top of the nozzle yet, sorry. I am not sure what existing tip thread pitch is, I made several adjustment...

Other than physical size and number of print heads what is the difference? Does the Cube Pro achieve the same quality as the 3 does?

Cheers

:-)

Thanks bolsoncerrado.


What other printers have you used?


FYI The upcoming MZBOT Voron2 printing looks promising, Linear Rails and Z belt.

Thanks TD, I have the image that you posted of your MM settings on my desktop, thank you!

It seems to me a universal profile might be hard to achieve. Maybe a few different profile that are best...

What is other members experience with FDM printers in comparison to the Cube3 printing at 100nm or less?

My personal experience with FDM, has been limited to the AnetA8, Taz5, Cube3, and whatever...

There are a number of ways to trouble-shoot this.

#1 Make sure the object in flat on the Z plane (Y is 3D software...).
#2 Re-export the .cube file.
#3 Make sure the file is centered, only one...

Hey folks, just re-read through the whole thread...

Now that I have my cube printing at 70um, I would like to address printing supports.

I am still using the cube slicer, as my brief experiment...

That seems really long... if you are printing at 70nm...perhaps?

Printing at 200nm should work well.

:-)

Sorry to hear about the print, when you mean "it stopped", did you get a filament jam? I have not tried to print the hub/clip/nozzle with the Cube3, I used my Taz 5. When I have time later on I...

Whoo hoo.. 2x ~7hr 70nm print success with Hubcap/Hubclip/Nozzle. I have noticed that my cube get an error T24 when dong a filament purge, but still prints?

heh heh... I am a...

regarding magnets...yes. off to hockey....

Cheers

JH

Thanks Tommy and Don. I ordered one. :-)

Also, thanks Don for stabilizer link. I was not sure what I was going to do other than keep print times to shorter times, I will definitely use that! The...

Thanks TD for replying, sadly the Stepper Motor image is too blurry to read.

https://www.youtube.com/watch?v=f4zyjLyBp64 :-)

I printed your TestCap nozzle in ABS and while the fit was...