Search:

No. I'm contributing to the thread. Again, you just don't quite get it. You have to precede the message with "@user" for others to know it is semi-private.
Rather than assuming others can read...

That's what I have been saying all along. Look at my previous post of the manual. That was a complete capture from a PDF file of the 3D Systems Manual which details this step x step.

Power up go...

I have an idea. Let's have some fun. How about we have a print off ? Everyone who has a Cube 3 or an Eco can participate.
Every Firmware has the Test Print.

First, set the Gap to .23mm,...

@Tim
Yep. For S****&Grins. I used your S3D settings changing only the Gap. Note, I use a "LokBuild" on my build plate.
I set the Gap to .23 as suggested by Lokbuild as a "START". I printed a...

"The rest of the audience is free to follow or not given advices on this or any other matter."
This is absolutely correct. However, proper Internet Ethics aka "Netica" suggest honoring, when
a...

How's this scenario...
Remove ur build plate
Run Auto Cal "MANUALLY" like I said and set the gap 2 inches from the print nozzle
Save by checking the check mark.
keep ur printer powered.
Put the...

@Tim

I volunteered you to answer JTs questions on the BFB thread. Don't get too pissed. OK?
G70

@JT

Hang tight...
Tim will answer all ur questions.

G70

@Kiza


Check ur gmail...

G70

Tom,
You are certainly entitled to your opinion. However, I would have a tendency to rely what is written in the manual. Following the above directions will set the z-gap manually, regardless of...

@MarkRon
[QUOTE]
And that 'Auto Cal' feature isn't even in the manual hahaha, how strange.
[QUOTE]

Straight out of the manual:
For this procedure, you will need the Gap Gauge from your tools....

@Kiza

[Quote]
By the way, does anybody know, what are the settings for movement/extrusion? Steps per mm in Cube 3 firmware.
[Quote]

The Cube firmware uses 8 as the diameter of the "gear" when...

I just blew a mouth full of coffee all over my monitor laughing...
G70

@Kiza
You crack me up!!!
Do you always do electronic testing with your cloths off? Is that a safety thing?
G70

Read this thread>>>http://www.print3dforum.com/showthread.php/1099-Interesting-reading-(on-the-Cube3-hack)
Contact Tomuro (Tomas) directly, I am sure he will be more than willing to assist you.
G70

That's the problem. I want to modify the xml file, adjusting parameters to my liking. But, I can't because not even an unmodified file will not encrypt like the original.
Could you publish your...

@Kiza. Is that you Alex?
G70

What works for me....
Select "Purge Nozzle" from the main menu. Start purge, wait 20 or so seconds. Cancel the purge.
Pulls right out.

G70

Tim,
Thanks for the BIG chuckle...
You get a "Like"

G70

- - - - - - - - - -

@swwinterry,
Thanks for the info. However, that didn't solve the issue I'm having. What I am attempting to do...

Another "Trick" for you other Slicer Tweakers.
CubeX Decode can be used to decode the "Build_Config_Cube_3.xml" and "ConfigurationCube123.xml" files that contain the parameters that
Cube Print uses...

That's right. (http://cubify.s3.amazonaws.com/) is the main part of the Link.
Browse down the xml dump to find what you are interested in DL'ing.
Example:
<Contents><Key>Printers/Cube/cube...

@Joecmay,
You might be surprised how many of us young bucks are really Old Farts. I'm 72
G70

If you are only upgrading the firmware, the SD card does not need to be removed. Just put the new Firmware on a thumb drive, insert it in the USB on the left side of the printer, then select upgrade...

Geez, get a room...... ;)

When I last talked with Tomasz, his Pro version was on a contribution basis. Send whatever you think it is worth. I am assuming this is still the case. Drop him an email....