Search:

I can help but some pics would be helpful to understand exactly what you have and are missing. Feel free to PM me.

Hi, yes. You'll find all of the boards are exactly the same regardless of the number of printjets.

The only potential issue you may run into when swapping/replacing nozzles is the advanced...

Hi, I can assist but I do recommend testing print quality of single nozzle vs. triple. Each additional printhead assembly adds considerable weight, which translates into more vibration artifacts. I...

I'm happy to reprogram them for you, if you can send to me along with a return envelope with postage. PM me if interested.

I would recommend 2 PLA, 1 INF, 1 ABS (dual color ABS doesn't work) and 2...

Unfortunately no, but if I do find it I will send you a PM. I also posted this to the Cube3 FB group and not hits there either :(. I know someone has this... We just need that someone to trip over...

This is usually caused by a massive build up of filament between the bottom cover and heat block, which acts as a heat sink. If you pop the bottom cover off (it's kind of a pain) and don't see that...

Yep, CubeX accepts BFB without issue and printing without chips present is possible. The only issue you're going to have is getting a third party slicer prepped and configured to produce the same...

You can find the full collection of 3DSystems files in the "Sticky: 3DS Cube File Links" (hint: it's right above this).

PM sent :)

Oh yes! You are in it now my friend :) PM me and I'll get an imperfect bed in the mail to you - the bed wobbles in place so you'll need to remove all three magnets, clean the back and then reinstall...

Ugggh, I do but I'm in the US. I think the shipping costs would crush you :(.

OK, this sounds to me like you upgraded the printjet but didn't activate the advanced printjet feature in the setup. It isn't that it doesn't see the cartridge, it just won't accept anything other...

Hi and welcome to the forum. I wish I had noticed this post sooner because I have a ton of xp with these printers and extra parts. I also love supporting STEM programs.

By now, you’ve probably...

No longer recognized? If you push the cartridge into place and then go to cartridge status in the menu, do you see it installed (IE, don't bother with the change cartridge function)? If not, are the...

I wouldn't recommend it in the Cube3. The pro did it through the advanced nozzle, which was a .5mm print tip. It might be very difficult to remove a wood grain clog in the print tip.

Here you go! It was ~12 posts below this one :)

http://www.print3dforum.com/showthread.php/5044-Autoloading-print-files-for-Cube3

Please read the instructions and watch the YouTube video....

It looks like your z gap needs to be loosened up a little. I recommend the calibration print files, especially when changing to print in Nylon or Wood. Some filament types need a little more of a...

I am at the tail end of repairing a few Cube3s and hoping to save a spare board with the Invalid Serial Number issue.

My board shows as FW v1.07. I have a good V1.14B board right next to it but...

I'm excited to see this project completed Jammin. I know you've put a ton of work into it and with zero prior experience with the CubePro that is no small task. Please keep us informed once you're...

Awesome! Always happy to hear about another Cube3 avoiding the landfill :)

Hey Wiz, I have a spare one of these that you are welcome to. It appears that you've removed the linear rail seat, which I believe is a no no. I can see one of the balls missing in your pic.
...

Sometimes when my auto-calibrate is off and the printer doesn't detect it, I adjust pads 2 and 3 (pad 1 - upper left hand corner shouldn't be adjusted) one way a 1/2 turn and then re-run. Another...

Yes, look at the next post down :) I know he's already moved the printjet assembly but I bet he still has this.

No, not at all. I've always wrestled with getting the filament to catch when reloading. Not sure if this is a common issue or not but it was very frustrating for me. This solves that and the only...

That guide is held in place with nuts & bolts. It appears you are missing a couple at the top of it.

I would recommend losing that altogether. It's purely aesthetic and serves no functional...