Search:

I do not.

Hello. I have a FabPro 1000. For the past several months, I've had an issue where the jobs are only partially printing and the resin is getting gummed up in the resin tray. Sometimes, the jobs...

Hello. My CubePro 2 has been printing well since getting a new extruder head and putting the Lokbuild cover on the print plate. I'm not using glue as it prints fine without it. However, I'm having...

Here's my configuration after putting everything back together. Thanks again.

4437

4438

I just got my CubePro 2 back together after an extruder replacement. Here's what I got with the first print job on the LokBuild. I quickly got a filament error. It also looks like the extruder...

Here's what I got with the first print job on the LokBuild. I quickly got a filament error. It also looks like the extruder burned a hole in the LokBuild. I also can't seem to get the remaining...

Hello. Does anybody have a picture of the wiring of the motherboard on the CubePro 2 from the back? I have my printer put back together after replacing an extruder but must have the wires mixed up...

Do you see anything wrong with the wires? The display isn't turning on when I power on the printer after reattaching the wires. Thanks again.

Alright, I'm pretty sure I got the backing together as well as it needs to be. I don't have the glass part in there but I think it will work fine without it. Now, I want to make sure I put the...

I think I've got it almost back together. Do you know what size nuts are used for the screws that hold the black track to the plastic tube guide? I seem to be short a couple of those. I have the...

Okay, so I've been able to get the extruder mostly back together. The question I have now is how to reinsert the glass piece at the bottom right of the plastic fixture. I have attached a few...

This is helpful to start with. Thank you.

- - - - - - - - - -

Here's what I'm looking at. My filament tubes seem to want to come in from the left. But, I'm having a hard time getting them in...

Hello again. I ended up purchasing a brand new extruder for our CubePro 2 and was able to get it into the location on the printer where it goes. However, I'm having trouble getting the rest of the...

Not sure how to PM you. I honestly just saw this. I’d be interested in that print bed if you still have it. Jesse Saunders, Avella Jr./Sr. High, 1000 Avella Road, Avella, PA 15312. Thanks.

- -...

It’s the left nozzle that is loose.

Thanks for the reply. I'll look into the LokBuild solution. I have attached a picture of the issue. You can see the filament hanging out the back of the nozzle. You might also be able to see that...

Hello. Our school has a CubePro 2 printer. It's a backup printer at this point as we've added a FabPro 1000. On the CubePro 2, the filament has come out of one of the nozzles and that nozzle is...