Search:

I'm pretty sure I had the temperature adjustment working correctly. You can use the cubify software to watch print head temperature and see that it changes throughout the print if I remember...

I modified the profile a little to produce this 3DBenchy file that has 150% Extrusion on the first layer. Download it HERE

Alright this Geckotek stuff is MAGIC!
https://photos.app.goo.gl/6egVFZ45moMiF94N7

It comes off easy and sticks like glue. I don't know how they did it. It leaves a finish that is as smooth as...

Instead of adding it to the current profile I would do what I did to get V2 which is just rebuild from a fresh CubePro profile. I would use the dual extruder profile and see if I can get that to...

I would assume this is what you mean.
3760
That seems to be a section for tool changes. I personally probably wouldn't worry about wipes because when i got my printer with wipes are half broken...

I would do that but I don't want to take apart the printer and rewire everything right now. But you have to admit what I have done right now really opens up stock cubes to more possibilities. Right...

I haven't built one of those myself but I believe TommyDee has some experience with this but I will help to the best of my ability.
I found this post by TommyDee which links to a help thread.

Hackintosh I see. I ran Mojave on my Dell XPS 13 for a little bit but sadly had to reinstall windows because I didn't have a compatible wifi card installed and I didn't have the money at the time to...

I still ordered the EZ-Stik Cold thing which is a build platform made for 3D printing. They are supposed to be pretty decent from what I have heard and they arn't that expensive. Yeah I haven't had...

That is pretty much just an elmer's glue stick. Nothing special.


- - - - - - - - - -

Is anyone familiar with geckotek? I ordered the EZ-Stik cold to try it out. I will report back on how well...

My pleasure ;). Getting stuff to work that shouldn't work is kinda what I do sometimes. I managed to get Android 10 running on my Samsung Galaxy S4 which was officially supposed to stop at KitKat.

This is very much in experimental stages and sorta kinda works. It seems to print much faster than the normal slicer but hey its working so I'm happy. All I did was modify the Cube Pro Single...

Personally I use a layer of thin double sided Gorilla tape but any thin double sided mounting tape will work. then on top of that I use a layer of upside down painters tape that I print onto. My cube...

Our team got one and we arn't even part of a school and never have been.

nvm I just finally discovered I can just change the firmware anyways and I don't even need to open up the system

Would replacing my Ekocycle's motherboard with one from a cube 3 convert my ekocycle into a cube 3 or are their more differences between the two systems?