Search:

To counter warping of the alu-bed, Right now the setup is using one screw in each corner. You can with this setup that Clayton has - drill additional holes on the side between the two existing.
...

Wow. Thats a fantastic mod. Doesnt seem that difficult either :)
Amazing work. Will look into it my self.

On this setup you could also counter warping in the Y-axis by installing another set of...

Gluestick on Kapton-tape.

An update to powering the heated bed through the extra extruder connector - it seems that it doesnt have enough power to have them both running at what temperatures i would like them to. I've been...

Yeah well i've sent a mail about it - but no response. Ill probably be buying a new board by the end of the summer.

Well, no?

I got it working now. I turned out that you could change the pin settings and use the second extruder-connector to power the heated bed. Now i control the printer as i would normally...

Yay! I can now use both extruder-connectors :) ...however, i cant see in any software how hot the heated bed is. I can control it using GCODE but i cannot use M105 to check the temperature of the...

I think im doing something wrong with the updating of the firmware. My settings should be fine but the board isnt reacting somehow.

Ok.

Well im not actually gonna use two extruders - im going to use one of the extruder-connectors on the board to power my heated bed, since the mosfet for the heated bed broke down on me a couple...

I know which settings control them - but maybe im not updating them correctly to the Rumba.

I've been trying to update the Configuration.h-file with the appropriate settings (using the...

Hi!

Does anyone have the firmware for the Dual extruder RL200?

Yes, bed mosfet burned. Cant resolder a new one - to fat soldering iron :(

Thanks for all the replies. Feeling really bummed out that my printer isnt running but havent given up yet! :)

Its really only the heated bed that wont cooperate - the printer works fine...

Thanks!

Bolson, firstly the PSU broke. The transformator inside had burned out. At the same time the MOSFET for the heated bed burnet out - i realised this when replacing the PSU.

So this...

Oh well.

Got a new replacement PSU because the old one broke. Now the board broke down.

Anyone know the best way to get in contact with Ethan or a cheap board that i can buy instead of waiting...

Ill try these tomorow:
http://pages.ebay.com/link/?nav=item.view&alt=web&id=251362536227

Hoping they Will do the job:)

I didnt need anymore :) And i wanted to add a Brim to counter warping - since the object was quite big. Since we're already limited to a width of 195mm, 180mm seemed ok. When using 180mm, the disc...

180mm disc for the BQ Scanning platform:
http://www.thingiverse.com/thing:727364

3D Printed Fly Fishing reel.

Printed with ABS in Yellow and Black.

Credits:
http://www.eclecticangler.com/development-of-my-3d-printed-fly-reel/
769770

Sanded with 400 + 600 grit paper for...

I printed it vertically. The slicer made it 2 lines thick, but the print was so slow that it did not matter. I rotated it around Z so that it was pararell with the X-axis. Layer height was 0,1mm

Count me in for a kit Ned :)

Whats the material you have on the heated bed?

An autoupload of the timelapse would be great :)
I have taken the time to setup a: Send an email incl. a snapshot of the printed object upon print completion

It works really good and suits...

Wow! Nice! :) What electronics did he usE?

Are you using Windows or mac to connect to OctoPi.local?