Thanks Thanks:  5
Likes Likes:  7
Dislikes Dislikes:  0
Page 1 of 10 123 ... LastLast
Results 1 to 10 of 99
  1. #1
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    244
    Post Thanks / Like

    Cube Print Temperature Modifier *beta*

    Last edited by Mythandar; 06-07-2018 at 04:03 AM.

  2. Thanks bolsoncerrado, jayden17, KHMusicMan thanked for this post
  3. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,054
    Post Thanks / Like
    I was onsidering getting a few of these:

    https://www.amazon.es/vovotrade-Wate...X5679WHKZDT2FM

    to leave them permanently attached to the Cube (not glued, just so small they are almost invisible ) with the .cube3 "commands" like an extension of the firmware/menus on the Cube...

    Wdy think?

  4. #3
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,449
    Post Thanks / Like
    Connect a Pi3 to the other USB port and have it snoop around

  5. #4
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,054
    Post Thanks / Like
    duH!? connect how? I mean I know the physical plug, whats next? ssh?

  6. #5
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,449
    Post Thanks / Like
    Can you run windows 10 on Pi3 or is there a 3D Builder app for Pi3? I guess that's Android?

    - - - - - - - - - -

    Technically, the printer is a specific device. If you know how to hack devices from their USB port, you can go to town.
    I still think that the communication layer and the proprietary hardware layer are superfluous.
    There is a hardware layer that we should be able to hack into with some hardware and a real brain.

  7. #6
    3D Printer Noob
    Join Date
    May 2017
    Posts
    14
    Post Thanks / Like
    There is a Windows 10 version for the Pi3 but it's not great. The Pi is an ARM processor and "built" for Linux based distributions. All of the official Raspberry Pi OSes are Linux variants. There was an android port but it's so slow it's not worth it

  8. #7
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,449
    Post Thanks / Like
    If it meets 3D Builder's OpenGL requirement, it may run.
    We have 3DS drivers for that -and- their ABS implementation with their rafts is quite nice!
    And you can remote your workstation. Talk about standalone

    I have the Lenovo YogaBook in the Windows 10 version. It handles 3D Builder nicely.

  9. #8
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,054
    Post Thanks / Like
    What is 3DBuilder able to do once communicating with the Cube?

  10. #9
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,449
    Post Thanks / Like
    Set up a print plate and send it to the 3DS print spooler.
    You can also save the build plate, but not the print settings.
    And the print settings in the 3DS driver lie.

    The driver implementation requires physical handshaking with the printer.
    Otherwise it defaults to a garbled RAW print file.

  11. #10
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    PETG on the Cube 3!!
    http://www.print3dforum.com/showthre...ll=1#post41792

    - - - - - - - - - -

    More results in PETG.
    http://www.print3dforum.com/showthre...ll=1#post41767

    - - - - - - - - - -

    Does this work with dual color as well?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •