Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Feb 2017
    Post Thanks / Like

    Print bed on CR-10

    Hello everyone,

    I recently just got my CR-10 400x400. My glass bed had a bend in it, just wondering I seen people talk about how they print to their metal heated plate. Is that a thing if so I'm just gonna do that instead of getting another piece of glass cut. Thanks

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Post Thanks / Like
    You dont want to print straight onto the alu bed but instead use something like this:

  3. #3
    3D Printer Noob
    Join Date
    Feb 2018
    Post Thanks / Like
    get a stock piece of glass at Lowes or Home Depot. they are much thinner and if the center is bowed, use aluminum foil on the center of bed to make it level. The one that comes with the CR10 is much too thick to force to bend.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts