Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    3D Printer Noob
    Join Date
    Oct 2017
    Posts
    13
    Post Thanks / Like

    3d printer brand for noob

    Hey guys im looking for my first 3d printer right now. Any recommendation which brand should i buy? Could you guys share me some experience of using it? thanks !

  2. #2
    3D Printer Noob
    Join Date
    Jul 2018
    Posts
    1
    Post Thanks / Like
    Hey man, I'm in the same boat at the moment and until someone more experienced replies, you might wanna check out this handy guide I stumbled upon. Since I don't need it for professional use, I'm thinking between XYZprinting Mini and Alunar. Any thoughts?

  3. #3
    3D Printer Noob
    Join Date
    Aug 2019
    Posts
    3
    Post Thanks / Like
    Hi guys! As for me, the best 3d printer for beginners is Wanhao Duplicator i3 mini.

    https://www.wanhaousa.net/product-page/ ... or-i3-mini

    The printer costs less than $ 200. But despite the simplicity of the design and low price, it makes high-quality models, especially if they are from PLA.

    Here are some of the main pros and cons: Nothing needs to be further customized and invented. To start the printer and print the model you don't need any special knowledge. But this printer doesn't have any heated platform, the case is open and the print area is small but it still large enough for most projects.

    If you want to know more about how to choose the 3d printer and make the right decision, I will recommend reading this article. It was very helpful to me.

    Good luck with your choice!

  4. #4
    3D Printer Noob
    Join Date
    Sep 2019
    Posts
    2
    Post Thanks / Like
    I see. That's good.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •