Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Z-ticks

  1. #1
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like

    Lightbulb Z-ticks

    Not a bug but an artifact of auto-leveling... Look for it on your favorite prints.

    z-ticks.PNG

    I had mentioned this before in unrelated posts but now I have evidence.

    My printer is doing a lot of Z-correction in the front-back orientation.
    While printing this little box, the z is corrected twice to maintain level.
    However, this little move leaves an imprint in your part.

    The reason I mention this in a dedicated post is to bring forth awareness.
    If you really want to get rid of this, you need to manually level your plate better than the auto-level allows.
    If you print a single wall thickness rail at 6" x 6", you will hear how many times the auto-Z adjusts.
    You would correct the leveling feet (not knowing which way to go, up or down, of course), you can imaging how the leveling would have to go for both X and Y.*

    * many left to right to left ... ticks only, Front to back no ticks: Adjust the right pad.
    * many front to back to front... ticks only, no side to side ticks: Adjust the forward left pad.
    * many ticks in both right to left and front to back; Adjust both right and left-front pads.

    After each adjustment, you would re-auto-level and reprint the single wall rail print from above.
    Once you get no ticks, you are dead level!

    Is this worth the effort... In my case for the example I am using, yes, definitely. That is more than 6 corrections along 6" of travel -only- in Y (front to back) in my case. This means the adjustment would be in the forward left pad only to level out his error. This probably happened because the pads can loosen up over time but the auto-level routing can correct for it. But as you can improve print quality, why not go through the routing at least once.

    YMMV

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    2,904
    Post Thanks / Like
    Wow, is THAT smart!? Live Z autocorrect!?

    It took Prusa a while to implement the autolevel feature hehe

  3. #3
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,027
    Post Thanks / Like
    Listen for the ticks as the print goes front to back...

    https://photos.app.goo.gl/LQROeSKU5PjXAtwE2

    After some serious adjusting, I got it down to 1 tick in front-back and 2 ticks left to right in a 6" square pattern.
    Much happier now! Each tick is only about a 1/128th of a turn on the pads.

  4. #4
    Regular 3D Printer
    Join Date
    Jul 2017
    Posts
    60
    Post Thanks / Like
    sheeeze! Now that is someone with a very keen eyeball! or earball?!?
    Tommy, you rock.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •