Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Dec 2017
    Posts
    5
    Post Thanks / Like

    What would be causing this (key kaps)

    Here is a link to what I printed https://www.thingiverse.com/make:424325

    Seems as if its not printing layer?
    This is what its supposed to look like (ignore the top part of the card holder. they modified it ) https://www.thingiverse.com/thing:2127340

    This did it also on https://www.thingiverse.com/make:422965

    Using cube print software. max settings
    Calibrated bed before each print

  2. #2
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,477
    Post Thanks / Like
    Try not using the "solid" setting.

  3. #3
    Expert 3D Printer
    Join Date
    Jan 2017
    Posts
    479
    Post Thanks / Like
    Quote Originally Posted by shawnhenson View Post
    Here is a link to what I printed https://www.thingiverse.com/make:424325

    Seems as if its not printing layer?
    This is what its supposed to look like (ignore the top part of the card holder. they modified it ) https://www.thingiverse.com/thing:2127340

    This did it also on https://www.thingiverse.com/make:422965

    Using cube print software. max settings
    Calibrated bed before each print
    It's caused by Cube Print software. This happens on a lot of prints that have a small area. The only time it doesn't happen is if you design it to an exact size that corresponds to the layer thickness.

    You could try another slicer. >>> http://www.print3dforum.com/showthre...rs-with-cube-3
    It will solve this problem.

  4. Likes AdamKempenich liked this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •