-
03-29-2021, 11:02 AM
#171

Originally Posted by
bolsoncerrado
So they're technically "perfectly level" on "factory" design?

Yep, that is the goal!
I did several designs for the "legs", some are for my current setup, some are for the final PCB Heater version. Also depends on the magnets to use.
This one is final for now, it includes the stabilizer. Print bed is much more stable now, very slight ghosting on the Y axis. It is acceptable, the prints are very nice 
165915177_802070050734428_6770098002496062029_n.jpg166043753_557533041853975_5060307793676465405_n.jpg
The latest (MK6) print head is better balanced, cooling is increased, LED Lights are properly positioned.
This will be the version to publish.
print head mk6 v23.png
My OCD is calm now
No more updates, except PCB Heater, in near future.
Here are some more photos:
166221681_649176315868713_8180385562461194701_n.jpg166086223_481653286351610_4032260173947397484_n.jpg166702727_3747063488715410_248013641169746969_n.jpg166469924_774530080131131_5283435939362428113_n.jpg
Edit (OCD is never calm):
Testing new stabilizers, rubber o-rings on the magnets:
166151323_1553503468187345_3406671070959189608_n.jpg
Much better stabilization by my first impression
Last edited by Kiza; 03-29-2021 at 12:03 PM.
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
03-29-2021, 12:15 PM
#172
Administrator
-
03-29-2021, 07:25 PM
#173
Administrator
YASQ (YetAnotherStupidQuestion
)
The stepdown converters are for the stepper fans??
I'll start our own forum "Teardown" Cube3 thread but for now, I'm here!
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
03-30-2021, 08:28 AM
#174

Originally Posted by
bolsoncerrado
YASQ (YetAnotherStupidQuestion

)
The stepdown converters are for the stepper fans??
I'll start our own forum "Teardown" Cube3 thread but for now, I'm here!

Wow nice! I see someone is already converting! 
Do not throw away anything, it will help you a lot! And do not unpin any connector yet.
Step-downs are to get 12 and 5V from 24V (stepper fans, leds, cooling fan and turbines)
Also you will need 2 mosfet boards, small ones, no need for powerful ones. We are very limited in space. One is used for print leds, the other is for print cooler turbines.
Regarding a Z-height, I lost around 25mm.
I'm sure I can re-design the head to MK7 single extruder version
Last edited by Kiza; 03-31-2021 at 02:56 PM.
-
03-30-2021, 10:49 AM
#175
Administrator
I'm tempted to try and leave the bed as is for now, im not planning to print ABS with this at the moment... I'm also a bit surprised at the path of the fan flow for the steppers, it's a bit weird. I wonder if they run too "overclocked" or it's just because they're hold by plastic that they need the airflow... but it looks like a too much restrictive path (and noisy, I guess).
-
03-31-2021, 08:42 AM
#176

Originally Posted by
bolsoncerrado
I'm tempted to try and leave the bed as is for now, im not planning to print ABS with this at the moment... I'm also a bit surprised at the path of the fan flow for the steppers, it's a bit weird. I wonder if they run too "overclocked" or it's just because they're hold by plastic that they need the airflow... but it looks like a too much restrictive path (and noisy, I guess).
Well, heated bed was the must have option for me, I am printing a lot of abs, heated bed helps with other plastics too, you don't need thick brims to hold the print in place. I'm using glass and cheap PVP glue stick, works perfectly!
Regarding the extruder steppers, dunno, left it as it was. I run them slightly overpowered, they can get quite hot, that's probably the reason. The printer is pretty noisy, mainly because of 3 always on fans, plus 2 turbines on, while printing.
Last edited by Kiza; 03-31-2021 at 02:58 PM.
-
04-01-2021, 07:09 AM
#177
Administrator
Pretty noisy and you removed the bed subwoofer! haha!!
-
04-02-2021, 04:54 PM
#178
If U are going to be converting to Single hotend, Just use a V6 with an Titan and a Pancake at the top... U are Limited with Speed anyway...
- - - - - - - - - -
So U will gain in Print quality...the rails are original thk so No Problem there is highend stuff
- - - - - - - - - -
Im trying to Push the cube3 corexy Design past 300mm/s, but i have serious Motor Heat issues(the original ones Not being Made for auch beating)....
-
04-17-2021, 11:05 PM
#179
Hello Kiza
Do you have the files for the fan casing and the final print head design? it looks great and I would like to apply this Mod to my CUBE 3 - thank you for your post
-
04-21-2021, 06:05 PM
#180

Originally Posted by
Kiza
Wow nice! I see someone is already converting!

Do not throw away anything, it will help you a lot! And do not unpin any connector yet.
Step-downs are to get 12 and 5V from 24V (stepper fans, leds, cooling fan and turbines)
Also you will need 2 mosfet boards, small ones, no need for powerful ones. We are very limited in space. One is used for print leds, the other is for print cooler turbines.
Regarding a Z-height, I lost around 25mm.
I'm sure I can re-design the head to MK7 single extruder version

Did i Start this Frenzy?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes