-
e3DV6 can be user with original electronic?
-
Hi guys!
Time to post some new pics. Finally got some spare time in the evenings, so after years of waiting, finally got some progress 
Here are some pics of mk1 and mk2:
IMG_5596.pngIMG_5517.jpgIMG_5573.jpgIMG_5574.jpgIMG_5576.jpgIMG_5586.pngIMG_5589.pngIMG_5613.jpg
And a small video:
https://drive.google.com/file/d/14cw...ew?usp=sharing
Nothing fancy yet, works ok, quality is good enough.
Waiting for the new board with 2209 drivers (sensorless homing) and optical probe, that will complete mk3 version.
After mk3 starts working, I will assemble it in the original casing.
If anyone is still interested, I will share some config and designs.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
-
I second that! That is some serious innovation.
-
Thanks guys!
My first 3DBenchy here. Supports didn't stick very well
I'm still a noob at printing. I forgot to apply enough glue.
IMG_5619.pngIMG_5620.pngIMG_5621.pngIMG_5622.jpg
-
-
ABS, 240 degrees hotend, 110 - bed
-
Thanks. I'm surprised it is curling that much with a hot bed.
-
That was my fault. And of course this print did not end up well. I did not re-apply enough glue, the print popped up at the end of print.
The result:
IMG_5626.png
Take 2:
IMG_5627.pngIMG_5628.pngIMG_5629.png
https://drive.google.com/file/d/1Pfk...ew?usp=sharing
And the result:
IMG_5631.pngIMG_5632.png
Last edited by Kiza; 12-22-2020 at 11:45 AM.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Okay, I am interested in an instructable or something similar. I have a cube3 that won't heat the hot ends and I want to do exactly what you just did. I will be using 2209 or something similar to get not only sensorless homing, but silence. I have a Cube2 that I did this with, and it works fairly well.
what kind of speeds are you getting?
That is one sleek looking model. Is there any reason why you used supports, other than you weren't sure that you have things configured well enough?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes