Thanks Thanks:  16
Likes Likes:  13
Dislikes Dislikes:  0
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 50
  1. #11
    3D Printer Noob
    Join Date
    Feb 2017
    Posts
    23
    Post Thanks / Like
    Quote Originally Posted by JackMeoff View Post
    @Kiza. Is that you Alex?
    G70
    Yep, thats me ^_^
    Last edited by Kiza; 03-02-2018 at 12:34 AM.

  2. #12
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,585
    Post Thanks / Like
    Quote Originally Posted by Kiza View Post
    Interesting idea! But the board already has DRV8825 drivers installed, in this case I'll have to use the external drivers. My concern is already limited space plus this approach may not be very good for the belt teeth health. That's the way Cube 3 original board was dealing with the endstops, but it was not doing it very well, the sound of skipping belt teeth drove me crazy
    How about flags under the base for the "Y" motion end stops? Should remain within the confines. The floor of the "tray" seems to have the most amount of room.
    Last edited by TommyDee; 03-02-2018 at 02:21 AM.

  3. #13
    3D Printer Noob
    Join Date
    Feb 2017
    Posts
    23
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    How about flags under the base for the "Y" motion end stops? Should remain within the confines. The floor of the "tray" seems to have the most amount of room.
    This is the endstop I'm going to be using:

    Screen Shot 2018-03-02 at 12.25.44 PM.png
    So far thinking of using the longer M3 socket cap screws that are holding the rails on the frame to attach the plastic holders for the endstops, still have to design them, waiting for the actual endstops to arrive.

    The tray is going to be used to hold the board itself, so no room there. I will have to be creative with the placement of the board.

    - - - - - - - - - -

    Some heatbed testing in action

    okQJKFRHqlwesl2WLrBRMaRrUpx-5Zyy-Ke0RItTj1eHKglYwzm7M3-ioA_64SObWh_i59fHuNUD6od6x12uhSAn6c3qd9DZ.jpgpJKgBAnhmw0Be-RncZTPVHDMIApNfLDwtoUJjgT4N0XIpdWM1WpvxAw-GnuuoAUUG3FzzTe2m24jXM3KrLaMkqzU_ZN1xSDj.jpg
    Last edited by Kiza; 03-03-2018 at 07:46 PM.

  4. #14
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,585
    Post Thanks / Like
    Looks like you need to print one of these...
    https://www.thingiverse.com/thing:2644528


  5. #15
    3D Printer Noob
    Join Date
    Feb 2017
    Posts
    23
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    Looks like you need to print one of these...
    https://www.thingiverse.com/thing:2644528

    Case is great! But I will not use this controller in the final version, since I'm going to use the MKS SBASE 1.3 board, which has a heated bed control. This controller I bought when I wanted to reuse the Cube 3 original board. But not anymore.

    - - - - - - - - - -

    I am still struggling with a good and clean placement of the optical endstops, specially on the Y axis. Really don't want to over-complicate it.
    The main problem is that a lot of good places are covered with the shell parts.
    Last edited by Kiza; 03-08-2018 at 04:17 PM.

  6. #16
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,585
    Post Thanks / Like
    You can move the sensor with the y-tray and fix the flag below. Loosely carry the wires with the heater wires.

  7. #17
    3D Printer Noob
    Join Date
    Feb 2017
    Posts
    23
    Post Thanks / Like
    Quote Originally Posted by TommyDee View Post
    You can move the sensor with the y-tray and fix the flag below. Loosely carry the wires with the heater wires.
    Thinking of this too, just cannot figure out yet the good placement and the way of placement. Really don't want to cut or drill any part of the shell itself.

  8. #18
    Regular 3D Printer
    Join Date
    Sep 2017
    Posts
    38
    Post Thanks / Like
    @Kiza
    You crack me up!!!
    Do you always do electronic testing with your cloths off? Is that a safety thing?
    G70

  9. #19
    3D Printer Noob
    Join Date
    Feb 2017
    Posts
    23
    Post Thanks / Like
    Quote Originally Posted by JackMeoff View Post
    @Kiza
    You crack me up!!!
    Do you always do electronic testing with your cloths off? Is that a safety thing?
    G70
    Hahahah, made my day ^_^

    - - - - - - - - - -

    Parts are finally here!
    Some pictures:

    28829258_10209015317979277_1267850564_n.jpg

  10. #20
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,585
    Post Thanks / Like
    This is just plain G O R G I O U S !!!

  11. Thanks Kiza thanked for this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •