Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    3D Printer Noob
    Join Date
    Apr 2018
    Posts
    4
    Post Thanks / Like

    CR-10 wrong homing position and limit stops not working

    hi, the printer is homing at the centre of the right hand edge and not the top left hand corner as it should. also the limit switches do not work. this is a new build and I have checked the connections are ok. is there some software I need to set home position and turn on the switches. if so what is it and how do I get it. or is the machine made wrongly from the factory. thanks, terry

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,067
    Post Thanks / Like
    Nothing must be performed "software side" aside from slicing and hitting print. Something else on the hardware may be wrong. Perhaps loose connections on the board, have you checked? Either way. contact your vendor.

  3. #3
    3D Printer Noob
    Join Date
    Apr 2018
    Posts
    4
    Post Thanks / Like
    Thanks that is what I thought. Is there a way to check if this is a real CR-10 or not just a copy. the quality of this printer is very poor. I am sending back to seller as I don't like it at all.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •