Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    3D Printer Noob
    Join Date
    Apr 2018
    Posts
    4
    Post Thanks / Like

    Help needed with print problems

    Hi, I am having a few problems with a print. Printer is Ender 3. Software is s3d. When I try to print a part with a raft the print starts well, but once the printer as completed 3layers of the oval that s3d sort of adds to a print the nozzle is 2mm off the bed level. The problem is when it starts to print the part I designed the nozzle is still 2mm off the bed. What am I doing wrong, why is s3d not adjusting the z axis to make the print.

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,069
    Post Thanks / Like
    Is the object you try to print manifold?

  3. #3
    3D Printer Noob
    Join Date
    Apr 2018
    Posts
    4
    Post Thanks / Like
    Sorry, what do you mean by manifold

  4. #4
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,069
    Post Thanks / Like

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •