Cura Settings for Rapide Lite 200

[daf]

windows/macOS Cura settings .....

[jase3d]

THANKS for that!

[Mark]

Thanks for the Cura settings. How to I get the print to do to the printer (and not the SD card)?

[Mark]

I got my Rapide Lite 200 talking to my Windows 7 PC. I had to download and install a driver:

RRD_RUMBA_TAURINO_DriverSetup.zip

from http://reprap.org/wiki/RUMBA

Then Cura was able to send the job to the printer. I still have alignment issues, but this is real progress!

[bolsoncerrado]

Anyone with Cura on MacOSX?

How do we access the SD card on the printer??

Cheers.

[Mark]

I suggest you work through using the USB interface as there does not seem to currently be a way to access the gcode files on the SD Card that I can see.

[bolsoncerrado]

Not sure what you mean by accessing using the USB interface? I plug the printer on the comptuer thru USB, obviously, and Cura has a SDCard icon which is grayed out... Shouldnt it be communicating already?

[Mark]

Not sure what you mean by accessing using the USB interface? I plug the printer on the comptuer thru USB, obviously, and Cura has a SDCard icon which is grayed out... Shouldnt it be communicating already?

I could not communicate (using Cura) with the printer until I downloaded and installed a device driver. Before that, I could only "print" to the SD Card from Cura.

[bolsoncerrado]

On my Mac i installed Repetier Host and nothing else, and I was able to access everything including the SD hmmmm

[Mark]

Windows 7 needed a device driver. Macs are different. Cheers