Cura Settings for Rapide Lite 200

[bolsoncerrado]

Thats how I'd issolate problems... Checking first if drivers are the actual issue to malfunctions...

[Zoom]

Hi daf hope you don't mind Ive made a link for the Cura Settings as above in DROPBOX

Cheers

[Mark]

Anyone else out there getting their Rapide Lite 200 to print yet? Mine makes all of the motions but no filament is being drawn or comes out of the nozzle. I get head and bed temperatures reported back to Cura, so I assume that the nozzle has power since it heats up.

[Zoom]

Hi Mark

Mabye Try these threads they might help you Iam still waiting for mine so I can not personally check it on my printer

Complications — or — Extruder making clicking noise

Cheers

[Mark]

I received a nicely detailed email from Ethan (CEO at Rapide) with ideas on how to solve my nozzle feed issues. After I give them a try, I will report back. Hopefully what he gave me will be useful instructions for anyone else with similar behavior.

[aleb]

Daf, how exactly did you obtain those settings? Thanks!

[daf]

Aleb
All settings are from Ethan @ Rapide Lite

Mark

I agree you would gain from reading the bulk of the forum as most have had or are having the issues you are having .

[Mark]

Mark

I agree you would gain from reading the bulk of the forum as most have had or are having the issues you are having .

I looked at other threads and did not see anything that helps with my port closing problem. If you can point to to a thread that talks about this, I'd really appreciate it.

I have done extruder adjustement work but am not able to test it (port problem again).

Thanks

[daf]

Mark
have you read this thread ?
can't connect to the printer

[aleb]

I looked at other threads and did not see anything that helps with my port closing problem.

This thread is about the Cura settings, please start a new thread if you did not find anything.

@daf Please edit the top post and mention the source of the info. Thanks!