Thanks Thanks:  7
Likes Likes:  5
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26
  1. #21
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,519
    Post Thanks / Like
    Yea, that's why I need to get some PETG. Only recently did I learn to change temps so that may be a good reason to buy some.
    ABS is super picky about the room temp and PLA does have its first-layer-adhesion limitations.
    Just need to consider the growing inventory storage requirements.

  2. #22
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    17
    Post Thanks / Like
    Oh, and to answer your question, I currently use Fusion 360. I have used a few different CAD software packages over the years and then sort of let myself go for a while. After Getting the printer I jumped into Fusion 360 and am slowly figuring things out again.

    - - - - - - - - - -

    PETG is strong like lion! Not brittle, very little to no bed adhesion problems on the stock bed, clearly comfortable in the cold and did I mention pretty?

    Just in case you decide you have room for it sometime in the future, I used 3D Solutech See Through Blue from Amazon, MakeShaper Clear from MakeShaper and MatterHackers Translucent Red MH Build Series from MatterHackers... No pressure... They just all seemed to work without issue...

  3. #23
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,519
    Post Thanks / Like
    Fair enough. Let me know if you need some numbers verified for the chip program station.

    Definitely thanks on the filament mini-review for PETG!
    I do like 3D Solutech for PLA. I'll keep an eye out for a deal.
    Last edited by TommyDee; 11-08-2018 at 11:34 PM.

  4. #24
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    17
    Post Thanks / Like
    Do you perchance have the CAD drawing for that chip holder and are you willing to share it? It would be an amazing help in making a negative of it for the socket.

  5. #25
    3D Printer God(dess)
    Join Date
    Nov 2016
    Posts
    1,519
    Post Thanks / Like
    These are STEP files that you should be able to import.

    https://drive.google.com/file/d/1KXO...ew?usp=sharing

  6. Thanks bobskinner thanked for this post
    Likes bobskinner liked this post
  7. #26
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    17
    Post Thanks / Like
    Files acquired and editing has begun.

    Your geniusness has also been noted! That there hub stub was exactly what I needed. Thank you!

  8. Thanks TommyDee thanked for this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •