New 3D Scanner on Kickstarter

[WildCats3D]

Apologies if Adverts are not allowed or I've posted in the wrong place
can an Admin move or delete as required please.

Hi 3D Printer / Scanner enthusiasts.

If you looking for a affordable 3D Scanner that gives great results then check this out.

https://www.kickstarter.com/projects...d-scanner-mkii

There are many examples of objects which we have scanned and printed to show you what its capable of,
have a look you may be surprised at the scan quality.

Chris..

ps. I've included a 3D scan example for you below

African2.jpg

[bolsoncerrado]

We don't usually allow spam posts but the project seems interesting enough....

Can you also post pictures of the MESHES of such scans?

[WildCats3D]

We don't usually allow spam posts but the project seems interesting enough....

Can you also post pictures of the MESHES of such scans?

Mesh pics as requested
These are points reduced scans as there is a limit to what you can print
the raw scanner output is much higher resolution
africanmesh.jpg

Untitled.jpg

[bolsoncerrado]

It looks very promising and tempting.

Can you give some details on the type of acrylic required to cut the pieces?

I may go for the DIY version of the kit

[WildCats3D]

It looks very promising and tempting.

Can you give some details on the type of acrylic required to cut the pieces?

I may go for the DIY version of the kit

We use 5mm Black 9T30 Perspex as this is matt on one side and reduces reflections
however you could use anything you have to hand, it don't need to be acrylic. might be best to spray
all surfaces inside with matt black paint to be safe.

Chris..