Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    3
    Post Thanks / Like

    Lightbulb New 3D Scanner on Kickstarter

    Apologies if Adverts are not allowed or I've posted in the wrong place
    can an Admin move or delete as required please.

    Hi 3D Printer / Scanner enthusiasts.

    If you looking for a affordable 3D Scanner that gives great results then check this out.

    https://www.kickstarter.com/projects...d-scanner-mkii

    There are many examples of objects which we have scanned and printed to show you what its capable of,
    have a look you may be surprised at the scan quality.

    Chris..

    ps. I've included a 3D scan example for you below

    African2.jpg

  2. #2
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,075
    Post Thanks / Like
    We don't usually allow spam posts but the project seems interesting enough....

    Can you also post pictures of the MESHES of such scans?

  3. #3
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    3
    Post Thanks / Like
    Quote Originally Posted by bolsoncerrado View Post
    We don't usually allow spam posts but the project seems interesting enough....

    Can you also post pictures of the MESHES of such scans?
    Mesh pics as requested
    These are points reduced scans as there is a limit to what you can print
    the raw scanner output is much higher resolution
    africanmesh.jpg

    Untitled.jpg

  4. #4
    Administrator bolsoncerrado's Avatar
    Join Date
    Nov 2014
    Posts
    3,075
    Post Thanks / Like
    It looks very promising and tempting.

    Can you give some details on the type of acrylic required to cut the pieces?

    I may go for the DIY version of the kit

  5. #5
    3D Printer Noob
    Join Date
    Oct 2018
    Posts
    3
    Post Thanks / Like
    Quote Originally Posted by bolsoncerrado View Post
    It looks very promising and tempting.

    Can you give some details on the type of acrylic required to cut the pieces?

    I may go for the DIY version of the kit
    We use 5mm Black 9T30 Perspex as this is matt on one side and reduces reflections
    however you could use anything you have to hand, it don't need to be acrylic. might be best to spray
    all surfaces inside with matt black paint to be safe.

    Chris..

  6. Thanks bolsoncerrado thanked for this post
 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •