Building Tomuro's Circuit.

[TommyDee]

Hey DRoo - http://www.print3dforum.com/showthre...ll=1#post45573

That is based on a vector board.

[DRoo]

Hey DRoo - http://www.print3dforum.com/showthre...ll=1#post45573

That is based on a vector board.

Thank you TommyDee,

I noticed that RicciEU had a different configuration of components compared to your own design, I was curious as to how he linked the back.
I also liked his sled design so wanted to replicate this.

I've just completed my build and its working great.
I'm so glad I found this forum.

[TommyDee]

RicciEU moved the components a little bit so that can be followed by the images. The wiring has to be the same. The code is what demands certain I/O from the NANO.

[DRoo]

RicciEU moved the components a little bit so that can be followed by the images. The wiring has to be the same. The code is what demands certain I/O from the NANO.

That's next on my list. Once I get Cura or Simplify3D (as you suggested) working.