Thanks Thanks:  4
Likes Likes:  2
Dislikes Dislikes:  0
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32
  1. #11
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    How is EU stock of eBay carts?

    Does computering include a license to drive a solder iron?
    Last edited by TommyDee; 02-02-2020 at 10:35 PM.

  2. #12
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    Eu Stock seems not bad I have more than 20 reference avalaible.

    Regarding competuring no It doesn't include a license to drive a solder icon I have already done some solder iron but this will be a little more difficult this time xD

  3. #13
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    Worth asking.

    Thank you for the information regarding stock.

    Very interested to know if the upgrade will also kill the chamber heater. That is another discussion where I am suggesting it was a corruption from the F/W swap rather than the norm.

  4. #14
    3D Printer Noob
    Join Date
    Jan 2020
    Posts
    6
    Post Thanks / Like
    yes in any case it will be usefull because I am on another project of modification of my e-scooter in order to make a new battery and the electronic part (bms mosfet ...) but it will be solder iron and impulse welding xD.

    For the issue with heating chamber I would say to you but for the moment I do not yet have abs on hand

  5. #15
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    Enjoy your projects

  6. #16
    3D Printer Noob
    Join Date
    Apr 2020
    Posts
    2
    Post Thanks / Like
    Hello,
    I have a cubepro duo 3D printer with two ABS cartridges. I want to be able to print in PLA but it is not easy to find cartridges for cubepro. Do you have a solution to flash my chip and put in the pellet of PLA instead of ABS?
    Thank you very much for your answer.
    I am a beginner in 3D printing and I know nothing about electronics. So it's very difficult for me. But I'm learning.

  7. #17
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    If you downgrade the CubePro app to version 1.87, you can edit the file to fool the printer into thinking it is ABS when the file is made for PLA. Not a good solution but possible.

    I can reset chips for you. You would send me the chips and I would change them to PLA. I would send them back with an included self-addressed stamped envelope.

    Bets bet is to keep an eye on ebay for cartridges. The PLA filament will not be good but the chip will be.

    If nothing else, I can make a couple of chips for you if you are in the USA. They would be $20 each as they are part of a complete Cube3 cartridge.

    So you have options. Let us know which appeals most.

    Long term, yes, there is a chip resetting tool in the works (ReCube Light) which can be upgraded to a pro version which will manage the whole series of settings on the chip.

    Are you currently running the software hack?

  8. #18
    3D Printer Noob
    Join Date
    Apr 2020
    Posts
    2
    Post Thanks / Like
    Thank you for your quick reply.
    How to modify the 1.87 file?
    Where to find this 1.87 file?
    I live in France is with the restrictions linked to the coronavirus it is very difficult to send mail, because we are in confinement.
    I found on ebay PLA cartridges. 50euro but good ...
    Thanks again.
    I will wait for the new version recube lignt

  9. #19
    Super Moderator
    Join Date
    Nov 2016
    Posts
    3,346
    Post Thanks / Like
    File editor - http://www.print3dforum.com/showthre...e3-File-Editor
    CubePro 1.87 - https://cubify.s3.amazonaws.com/Prin...bepro_1.87.exe <= direct download link


    No worries on shipping from France. Not a simple option. Understood.

  10. #20
    3D Printer Noob
    Join Date
    Apr 2020
    Posts
    1
    Post Thanks / Like

    print cube pro diferent material

    Quote Originally Posted by Maurad View Post
    Thank you for your quick reply.
    How to modify the 1.87 file?
    Where to find this 1.87 file?
    I live in France is with the restrictions linked to the coronavirus it is very difficult to send mail, because we are in confinement.
    I found on ebay PLA cartridges. 50euro but good ...
    Thanks again.
    I will wait for the new version recube lignt
    como imprimir en cubepro con diferente material


    1. crea el archivo desde el slicer de cubepro v1.87 con el filamento que quieres imprimir
    2. con el archivo de extension cubepro abre cube utilities y selecciona el editor
    3. con el editor modifica el tipo de filamento y ponle el filamento que tenga el chip del cartridge
    4. crea el nuevo archivo que sera xxxxMOD.cubepro
    5 el archivo xxxxMOD.cubepro descompilalo, con cube utilities cex cube extractor, te van a quedar varios archivos como:
    index, front view , rear view, y el archivo xxxx.cubepro
    6 pasa nuevamente por el editor de cube utilities y edita el tipo de material nuevamente genera el nuevo archivo te va a quedar
    xxxMOD.cubepro, este es el archivo que puedes imprimir.

  11. Thanks TommyDee thanked for this post
    Likes TommyDee liked this post
 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •