CubePro FIRMWARE Hacking

[TommyDee]

How is EU stock of eBay carts?

Does computering include a license to drive a solder iron?

[darkzero]

Eu Stock seems not bad I have more than 20 reference avalaible.

Regarding competuring no It doesn't include a license to drive a solder icon I have already done some solder iron but this will be a little more difficult this time xD

[TommyDee]

Worth asking.

Thank you for the information regarding stock.

Very interested to know if the upgrade will also kill the chamber heater. That is another discussion where I am suggesting it was a corruption from the F/W swap rather than the norm.

[darkzero]

yes in any case it will be usefull because I am on another project of modification of my e-scooter in order to make a new battery and the electronic part (bms mosfet ...) but it will be solder iron and impulse welding xD.

For the issue with heating chamber I would say to you but for the moment I do not yet have abs on hand

[TommyDee]

Enjoy your projects

[Maurad]

Hello,
I have a cubepro duo 3D printer with two ABS cartridges. I want to be able to print in PLA but it is not easy to find cartridges for cubepro. Do you have a solution to flash my chip and put in the pellet of PLA instead of ABS?
Thank you very much for your answer.
I am a beginner in 3D printing and I know nothing about electronics. So it's very difficult for me. But I'm learning.

[TommyDee]

If you downgrade the CubePro app to version 1.87, you can edit the file to fool the printer into thinking it is ABS when the file is made for PLA. Not a good solution but possible.

I can reset chips for you. You would send me the chips and I would change them to PLA. I would send them back with an included self-addressed stamped envelope.

Bets bet is to keep an eye on ebay for cartridges. The PLA filament will not be good but the chip will be.

If nothing else, I can make a couple of chips for you if you are in the USA. They would be $20 each as they are part of a complete Cube3 cartridge.

So you have options. Let us know which appeals most.

Long term, yes, there is a chip resetting tool in the works (ReCube Light) which can be upgraded to a pro version which will manage the whole series of settings on the chip.

Are you currently running the software hack?

[Maurad]

Thank you for your quick reply.
How to modify the 1.87 file?
Where to find this 1.87 file?
I live in France is with the restrictions linked to the coronavirus it is very difficult to send mail, because we are in confinement.
I found on ebay PLA cartridges. 50euro but good ...
Thanks again.
I will wait for the new version recube lignt

[TommyDee]

File editor - http://www.print3dforum.com/showthre...e3-File-Editor
CubePro 1.87 - https://cubify.s3.amazonaws.com/Prin...bepro_1.87.exe <= direct download link


No worries on shipping from France. Not a simple option. Understood.

[luishiga1980]

Thank you for your quick reply.
How to modify the 1.87 file?
Where to find this 1.87 file?
I live in France is with the restrictions linked to the coronavirus it is very difficult to send mail, because we are in confinement.
I found on ebay PLA cartridges. 50euro but good ...
Thanks again.
I will wait for the new version recube lignt

como imprimir en cubepro con diferente material


1. crea el archivo desde el slicer de cubepro v1.87 con el filamento que quieres imprimir
2. con el archivo de extension cubepro abre cube utilities y selecciona el editor
3. con el editor modifica el tipo de filamento y ponle el filamento que tenga el chip del cartridge
4. crea el nuevo archivo que sera xxxxMOD.cubepro
5 el archivo xxxxMOD.cubepro descompilalo, con cube utilities cex cube extractor, te van a quedar varios archivos como:
index, front view , rear view, y el archivo xxxx.cubepro
6 pasa nuevamente por el editor de cube utilities y edita el tipo de material nuevamente genera el nuevo archivo te va a quedar
xxxMOD.cubepro, este es el archivo que puedes imprimir.