CubePro FIRMWARE Hacking

[Samox888]

Hello, i just got my cubepro and as anyone i also want to make the mod on the firmware for using third part printing material, but i just realize that the link of that firmware is not available. I was wondering if any of the people who already got the modified or the original firmware could please upload it to any platform and send the link.
Please!!!

Hi, i find a solution on ebay for my cube pro, it works flawless, it's a device that reset cartridges chips to 0% of use. They supply a pen drive to use the old cartridges chip to emulate the presence of a original new spool and a device to reset the chip when its 100% back to 0%. Check for 3d System refill on ebay

[jp24]

Hi, I've been trying to hack my cubepro, but the files in the link seem to be deleted, can anyone help me?
I'm trying to find the hacked version of the cubepro but I don't find it anywhere

[TommyDee]

The original poster on OpenBuilds seems to have pulled the files according to recent reports. If you failed there, there is no replacement dropbox.

Do know that CubePro has reported some upgrade issues related to the chamber heater. Not an isolated report. This could be why the hack was pulled.

As to options, I encourage you to look at building Tomuro's circuit. A little DIY knowledge can go a long way. http://www.print3dforum.com/showthre...muro-s-Circuit

There is a cartridge resetting tool on eBay as well.

Good luck.

[vecdatra]

Yes, you can install factory F/W on top of modified F/W. Current CubePro version is v2.02.

Many Thanks, So V2.02 is installed and I can connect via Telnet on Port 23: 3D Diagnostics Server 1.1
But what is the Username and Password?
Thanks in advance.

[TommyDee]

I think I once found the password in one of the DLL files. Open Builds might have some information too.

[vecdatra]

Some one any idea how to reset the CubePro back to factory settings?
I would like to be able to change the name of the Printer.
I hope there is something available.
(only Firmware change, changes nothing)
May someone have the original factory data from internal sd card?
Thanks in advance

[TommyDee]

There are two .bin files that are unique to your printer. It keys off of the host-id. It holds your activation key.

Yes, I was once given a factory reset code. I'll have to find it. They do a 'filename on USB stick' to activate special codes. Be aware that the full reset includes removing the activation code.

[cocona]

Thank you very much for your help

[DANAUTA]

Pretendo reutilizar uan cubepro duo. Por casualidad tienes el Firmware 2.0 hacked para cubepro. El sitio indicado no contiene nada, dice que fue eliminado

[TommyDee]

The firmware V2.0 never worked right. Also, V1.0 has shown to be problematic with CubePro. I might suggest ReCube: http://www.print3dforum.com/showthre...muro-s-Circuit