CubePro FIRMWARE Hacking

[bolsoncerrado]

Step 0) Optional. Adviseable. Be sure to spend some of your new cartidges below 100%!

Step 1) Get ready for your CubePro 2.0 by downloading the hacked firmware here

Step 2) Follow the users guide to update your printers firmware (ie stick the USB on your printers side, choose firmware menu, update, etc)

Step 3) Enjoy!

[stephane]

[DEVIS = bolsoncerrado; 45751] Étape 0) Facultatif. Conseillé. Assurez-vous de dépenser certaines de vos nouvelles cartouches à moins de 100%!

Étape 1) Préparez votre CubePro 2.0 en téléchargeant le micrologiciel piraté ici.

Étape 2) Suivez le guide de l’utilisateur pour mettre à jour le micrologiciel de votre imprimante (c.-à-d. Collez la clé USB sur votre imprimante, choisissez le menu du micrologiciel, mettez à jour, etc.)

Étape 3) Amusez-vous! [/CITATION]

Hello,
I hope I am in the right place to make this request urgently. I have two pro duo and mono cube with firmware 2.02, latest version of 3ds, can not install version 2.00 hacked via toolbox on version 2.02. or then I find the original 2.00 version of 3ds in order to install the hacked version 2.00. Thanks for considering my post i am in big shit Mr. Bravo for your job, i would be sharing in the future my printing experience with the print3dforum community
Stéphane from New Caledonia
Bonjour,
J’espère que suis au bon endroit pour vous faire cette demande en urgence. Je posséde deux cube pro duo et mono avec un firmware 2.02, dernière version de 3ds, impossible d’installer la version 2.00 piraté via toolbox sur la version 2.02. ou puis je trouver la version original 2.00 de 3ds afin d’installer la version piraté 2.00. Merci de prendre en compte mon post je suis dans la merde grand M. Bravo pour votre boulot, je partagerais à l’avenir mon expérience d’impression avec la communauté de print3dforum
Stéphane de nouvelle Calédonie

[TommyDee]

There are some tricks to forcing the firmware onto your CubePro printers.
I have not done this so please understand I am repeating what other people have said.

1: start the firmware update on the current version 2.02 with legit firmware. Once the firmware starts to update, replace the USB key with the hacked 2.00 FW with the same name as the 2.02 legit firmware. With luck (and probably a few attempts) the machine will continue to install the modified firmware after you replaced the file.

Hope that helps. Also see "Building Tomuro's Circuit" for alternatives.

[darkzero]

Hello ,

I am currently new owner of a cubepro mono.
I would like to know the advantage of this firmware.

I read that the cartridges were no longer in production. Is this firmware a bypass and in this case should I have to use original cartridges depending on the material used ? thank you for your answers I am new to the subject but I learn quickly

For now I able to print a yxz cube its a good start xD

[TommyDee]

Welcome to the forum Darkzero. For CubePro, one downgrades to v2.00. There is also a report that the chamber heater stops working. And if that is okay, there is a trick to actually loading the F/W. Oh, and cartridges have to be under 100% (initialized).

For CubePro users, I highly recommend the ReCube alternative if you have the skills to fabricate such a thing. This simply resets cartridges without messing with the machine.

[darkzero]

Hi TommyDee thank you for your answer.

I have done the firmware update with the hacked firmware because mine was in 1.0 and I didn't find any link to downlad 2.0 official


Do you know if it possible to load the offical 2.0 firmware over the hacked firmware

I have only one cartridge for now in pla and I will have to buy other so Im agree with you recube is better in this case

[RicciEU]

Hello DarkZero, After you flashed the firmware hack did your chamber heater stop working?

- - - - - - - - - -

Hello TommyDee, Sorry do I understand the reCube correctly. So its a arduino nano that reformats or reflashes the cartridge chip to 100% so one can reload the cartridge with aftermarket material? Does one reflash the chip each time or does the reflashing stop the cubepro machine from counting the material paying out? As the original cubepro cartridge only came with 600grams of material I am hoping to find a solution that allows me to print more than 600 grams.

Thank you in advance.

[TommyDee]

Yes, you can install factory F/W on top of modified F/W. Current CubePro version is v2.02. If you have trouble finding the original F/W, let me know. This is the the link from the repository site: http://cubify.s3.amazonaws.com/Print...pro%20V2.02.ar Download and install via USB drive.

The application is: http://cubify.s3.amazonaws.com/Print...bepro_2.02.exe <<== executable link! I can't seem to unlink it.

ReCube is described in absolute detail here: http://www.print3dforum.com/showthre...muro-s-Circuit

[darkzero]

Thank you very much for your help
In this case I will upgrade to the official version and downgrade if necessary using the technique indicated above.

The main thing now for me is to find original cartridges

[tricorter]

Yes, you can install factory F/W on top of modified F/W. Current CubePro version is v2.02. If you have trouble finding the original F/W, let me know. This is the the link from the repository site: http://cubify.s3.amazonaws.com/Print...pro%20V2.02.ar Download and install via USB drive.

The application is: http://cubify.s3.amazonaws.com/Print...bepro_2.02.exe <<== executable link! I can't seem to unlink it.

ReCube is described in absolute detail here: http://www.print3dforum.com/showthre...muro-s-Circuit

The links provided are broken, any chance at posting the files for download or a 3rd party source?